It is said that Cam belts are vulnerable to age (counted in years and / or
mileage covered) and also to short-journey overall usage. SO....when I started
with my H4 in 2009, I had the belt changed by my local garage. (Also a 1.6
Zetec "silvertop". The task was done with the engine in situ, I was told that
it was very tight, but they managed. I hope this helps. Bill
On Friday, 3 November 2017, 12:50, rgmscarfe via Quantum Owners Group
<[email protected]> wrote:
Does anyone know if you can change the cambelt on a 1.6 zetec engine in situ
in an H4? It all looks very close to the framework. Any advice would be most
welcome.Mine was fitted in 2000 before installation and is now 17 years old,
but not done a large mileage circa 30,000 miles!Thank you in anticipation. Ron
Scarfe.--
--
You received this message because you are subscribed to the Google Groups
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners
Club nor the individuals associated with the Quantum Owners Club or in the
preparation of the above information shall have any liability to any person or
entity with respect to liability, loss, or damage caused or alleged to be
caused directly or indirectly by the instructions contained within this or
related message(s).
---
You received this message because you are subscribed to the Google Groups
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
--
--
You received this message because you are subscribed to the Google Groups
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners
Club nor the individuals associated with the Quantum Owners Club or in the
preparation of the above information shall have any liability to any person or
entity with respect to liability, loss, or damage caused or alleged to be
caused directly or indirectly by the instructions contained within this or
related message(s).
---
You received this message because you are subscribed to the Google Groups
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
