Was the engine slanted in the ST170 ?  
If so, any idea of the angle.
I’ve one to go in a H4 but i assumed it was level.

I’d be interested in your old engine for use as a mock up engine in the H4, the 
one i have is very low mileage and quite clean, i’d like to keep it that way 
Depending on where you are in the UK

Jim



From: russ price 
Sent: Sunday, October 27, 2019 6:05 PM
To: Quantum Owners Group 
Subject: [Quantum Owners] ST170 in a saloon

Back in the summer I bought a saloon fitted with an ST170 engine with a low oil 
pressure problem and other than fixing the window winder haven't touched it. 
However i now have what i hope is a good replacement ST170 engine which should 
be fitted in the next couple of weeks. When the old engine is out i'll have a 
look to see what was the cause of the low pressure but one thought I've had 
(which may well be complete rubbish) is :- could the problem be with the 
sump/oil pickup as the engine is now upright but would have slanted slightly 
when in the Focus, is the change of angle sufficient to cause a problem? Anyone 
done a similar conversion? 

Russ


-- 
-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en
 
IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
--- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/quantumowners/00fd9029-8be1-46db-b462-c76e21139f5a%40googlegroups.com.

-- 
-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
--- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/quantumowners/F7C29524AFA7472DA57BC5E4F3D3C2AC%40JimQuad.

Reply via email to