Does anybody happen to have a home Zinc Electroplating setup ? I have a part a small mild steel part (about 25 x 20 x 60 mm OD ) i’ve made for 003 that could really do with electroplating rather than painting. Need it done ASAP so i can continue the assembly.
I can send it to you by DPD and arrange for it to come back the same way. The electroplating setup is on my to buy list but at the moment i don’t really have space to store all the buckets of chemicals and there is only this 1 part i need to do. Many thanks, Jim -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/1186724A009F4030AED6CEE513046CC7%40JimQuad.
