Thanks for info, i have no desire to play around with settings but i found play in a bottom ball joint and noticed the TCA's were adjustable, no real problem in itself except one is about 18mm longer the other, so that made me wonder if any other "improvements" had been made, the car should be being measured today, when i get the results they should make interesting reading. Russ
On Thursday, June 4, 2020 at 11:00:51 AM UTC+1, russ price wrote: > > Hi All, Can anyone tell me what toe in/out (front & rear) camber and > castor angles are recommended for the saloon? > Russ > -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/91e653f4-040f-4968-8e4b-3621867d0e48o%40googlegroups.com.
