If you need to replace the MAF then from what I remember it isn't tied to the ECU so a MAF from a similar 2.0 Mondeo ought to swap. Mine was from a P-reg Mondeo - I can take a photo of it to see if it's the same as the earliest engines?
On Saturday, 19 December 2020 at 15:12:28 UTC julian wrote: > Hi > > I've just found that the mounting bracket on the maf sensor body on the H4 > has snapped. The engine is a 2L Mondeo. Can anyone advise how to go about > finding a replacement given I have no info on the car this engine came > from. The engine is a very early model but I'm not certain that the sensor > body is a match anyway. The maf is correct for the engine and is working > fine. > > Thanks > -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/86d64d98-dcdb-499d-8083-4add8fb2a8d3n%40googlegroups.com.
