The circuit for the flap relay is in the build manual. I recently completely rewired everything on the bonnet on my 2+2 project, all new wiring and connectors, the relay was attached to the headlight on the nearside and didn't operate until the dipped or main beam were used. The relay is now on the front subframe and is operated by either the main beam or the sidelights, I'm afraid I don't know the answer regarding the legality of just having the sidelights behind the flaps.
On Sunday 18 February 2024 at 21:58:40 UTC John Beckett wrote: > Hello, > > I am currently wiring up the front end of my 2+2. I have non of the > original wiring in the nose cone. The issue I have is getting the flaps to > work does anyone have a wiring diagram for them. > > From the other posts I see I need 2 1n4005 diodes and a relay to run the > flap motor but how big does the relay need to be and where do the diodes > fit in thr circuit. > > Ideally i would like to use the side lights in the head light it's self as > I don't have the original side / indicator unit that sat in the rectangle > hole. Will it pass an mot using the side lights in there or do I need to > try find a side / indicator unit to fit. > > > Cheers > > John > -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/8f58de77-e573-467c-956a-48b9a47f750dn%40googlegroups.com.
