Pickup pipe gasket is all i could think of. I seen CVH engines with quite a bit of wear on the crankshaft nose where the oil pump mates with it but i’d be surprised if it wore enough to not engage the pump.
In the 2+2 you can get the crank shaft pulley off in the car if you loosen the top engine mount nuts and push the engine across to the gearbox side. I don’t know if that will work in the saloon. Mind you, fitting new CVH sump gasket with the engine in the car is always risky, i prefer to fit them with the engine upside down on a engine stand. Jim From: John R Sent: Wednesday, June 18, 2025 12:20 PM To: Quantum Owners Group Subject: Re: [Quantum Owners] Oil Pump Priming - CVH engine Yes cranking with plugs out. Also used some diesel heavy duty batteries jumpered to do prolonged cranking. The usual culprit for cvh no oil pressure (other than knackered pump) is pressure relief valve sticking open but I am certain that is not the case here. I think either pump has somehow died through lack of use or maybe the pickup pipe to pump gasket has started leaking. Quite strange as no problems before lay up for car refurb/mods. I was hoping to get saloon back on road very soon but looks like I am going to have to drop engine and change the oil pump. Grrr. On Wednesday, 18 June 2025 at 09:15:53 UTC+1 Jim Hearne wrote: That is a strange one, i don’t remember ever having an issue with the oil priming on a CVH. Apart from oiling all the bearings etc when assembling the engine, all i used to do was half fill the oil filter with oil and that was it . When cranking did you have the plugs out so it spins over faster ? Jim From: list...@liberator-systems.co.uk Sent: Tuesday, June 17, 2025 10:00 PM To: Quantum Owners Group Subject: [Quantum Owners] Oil Pump Priming - CVH engine I am having a problem getting any oil pump flow/pressure on cvh engine after it has been sitting unused fo ages although turned over occasionally. I assumed pump ihas dried out so have been attemting to get it primed again but without success. Before lay up engine had no oil presuure problem. I have tried various methods including:- Overfilling sump Filling filter Pumping oil in via oil pressure switch port Pushiing some Wynns/STP thick oil treatment into pressure relief valve port Prolonged cranking of engine using multiple batteries Starting engine and running for max 30 secs So far have not got any indication of oil being sucked up and pumped - no pressure indication on switch or gauge and no oil comming out of switch port. The pressure relief valve has been removed/checked/cleaned several times - it was not stuck in open position. The pump pickup is clean - I know as ichecked when I fitted new sump. Anyone got any other ideas? I want to avoid having to change pump (drop engine job) if possible - especially as I know the pump was working fine before lay up. Thanks John -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantu...@googlegroups.com To unsubscribe from this group, send email to quantumowner...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowner...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/quantumowners/b3ccf745-2f05-488f-9c8b-ac2621e8c80bn%40googlegroups.com. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/quantumowners/7ee30b08-16b1-4292-9e7f-4c11d0488c8dn%40googlegroups.com. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/quantumowners/342AE606AF1E455B82AD379007A953ED%40JimQuad.
