Dne petek, 10. junij 2016 19.47.34 UTC+1 je oseba Kevin Lipe napisala: > I created a USB installer for Qubes 3.1 and tried to install it on my Lenovo > X220 tablet (with an i5 2520M, VT-x and VT-d enabled) and can't seem to get > the thing to boot. I've previously installed an older Qubes release on my > X200 and had to disable VT-d to get it to work, but the X220 is supposed to > be supported out of the box. Whether I use the standard "Test & Install" > method or the "Troubleshooting/verbose" method, I can't get past this screen > (attached screenshot). Any suggestions? I tried editing the boot line to add > "iommu=no-igfx" and that seemed to have no effect.
Good morning. You need to add the following two parameters to the boot line to get the installer to boot: /mapbs /noexitboot You will also have to follow the procedure described on the following URL *before restarting* the computer after the installer has finished. https://www.qubes-os.org/doc/uefi-troubleshooting/ The video will still be garbled during the first boot phase but the Qubes will continue to boot. I case you are using EFI I'd suggest keeping a bootable USB drive with rEFInd 0.10.3 bootable ISO near by because I find it easier to boot the Qubes in case something went awry than using the default EFI boot loader. Good luck, Matej. > > > Thanks! > > > KL -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/0e1c83a8-e48d-4167-a87d-e46c93c09a9f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
