I have read a lot of documentation and the laptop is on the HCL as working. W540 i7 4900 Nvidia K2100M 16GB RAM 3k Dispaly
Issue: Installer will freeze after about 1 minute in the GUI everytime, no matter what step you are one. Things I noticed: About t-5 seconds to a total system halt (keyboard and mouse stop working) The progress spinning wheel hangs. If you are in a CLI installer you see the error: (anaconda:1131): Gdk-ERROR **: error: XDG_RUNTIME_DIR not set in the enviroment Pane is dead Troubleshooting done: Download... Verified and Redownloaded Image... Using Rufus Tried multiple USB drives Set BIOS to UEFI/EFI CSM on and off (every combo) Disabled TPM in BIOS as that was how the W540 in HCL was setup.... No Change Changed power management settings in BIOS Reset BIOS to factory settings Disabled VT-D Slammed head against wall Added args to xen.cfg to disable nvidia card Attempt 1 [qubes] options=console=none kernel=vmlinuz inst.stage2=hd:LABEL=Qubes\x20R3.1\x20x86_64 i915.preliminary_hw_support=1 rd.blacklist.drivers=nouveau nouveau.modeset=0 quiet rhgb ramdisk=initrd.img Attempt 2 [qubes] options=console=none kernel=vmlinuz inst.stage2=hd:LABEL=Qubes\x20R3.1\x20x86_64 i915.preliminary_hw_support=1 i915.modeset=1 nouveau.modeset=0 quiet rhgb ramdisk=initrd.img Nouveau messages can still be seen on startup with both of those on xen.cfg on the flash drive. Notes: BIOS does not have an option for disabling NVIDIA chip This is really stressing me out thanks for any help. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/1c505760-838c-4396-b6c8-c7193981fa05%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
