Successful install of Qubes on a Dell Latitude E6510. Thought I would attempt a Windows 10 HVM. Creation of the HVM is fine; attempts to boot the VM from the retail media fail. Although Dom0 sees the Microsoft retail USB, and I'm able to create a DD iso from it, I can't seem to get the VM to recognize the boot media when I start.
the VM says: ata0 slave: QEMU HARDDISK ATA-7 Hard-Drive (2048 MBytes) ata1 slave: QUME DVD-ROM ATAPI-4 CD-Rom/DVD-Rom iPXE (http://ipxe.org) 00:04.0 CA00PCI2.10 PMM+00100010+00113020 CA00 Press F12 for boot menu Booting from CD-Rom 14783MB medium detected (this is about the size of the windows USB stick) CDROM boot failure code: 0005 Boot from CD-Rom failed: could not read the boot disk Booting from Hard Disk... Boot from Hard Disk failed: not a bootable disk No bootable device. Powering off in 30 seconds. I've tried what seems like every permutation of adding an argument like --cdrom=/dev/sdb, cdrom=/path/to/win10.iso, drive=cdrom/dev/sdb, etc. I've also used the GUI functions for using these paths as "additional drives." I am fearing there is some anti-piracy doodad on the retail USB that prevents me from booting unless I'm booting, but I can't think of what that would be. New guy. If you're going to drop a lot of cli-fu on me, go slowly. Many thanks, Rick -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/51ba9dc7-1e6b-4415-923b-9edb71b55974%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
