I'm trying to create a ProxyVM of my own, to replace sys-firewall. I'm on 3.2rc2-testing.
When I create a ProxyVM in either fedora23 or debian-8, eth0 shows up, but no vif interface appears. There are iptables entries for 10.137.4.*, so the firewall mechanism seems to be doing (part of) it's thing, but with no vif device itself. /proc/net/dev on my ProxyVM shows only eth0 and lo, whereas on the sys-firewall it shows eth0, lo, and a vif interface. dmesg (on debian-8) shows: [ 1.257473] xenbus_probe_frontend: Device with no driver: device/vif/0 [ 1.257661] Magic number: 1:252:3141 ... But no further reference to vif. Whereas on sys-firewall, dmesg shows: [ 1.277519] xenbus_probe_frontend: Device with no driver: device/vif/0 [ 1.277687] Magic number: 1:252:3141 ... [ 33.337886] IPv6: ADDRCONF(NETDEV_UP): vif105.0: link is not ready [ 43.258766] vif vif-105-0 vif105.0: Guest Rx ready [ 43.258813] IPv6: ADDRCONF(NETDEV_CHANGE): vif105.0: link becomes ready ------------------ What am I missing? Is there something in dom0 or in the ProxyVM's start scripts I need to configure the vif interface, so I can do some Proxyin'? I thought I recalled creating my own ProxyVM in 3.1 to check it out, and I *thought* the vif appeared automatically, but I could be mistaken about that. I did some Googling and reading of xen networking pages, but am quite lost as to why this interface isn't showing up (other than the mentio nof device/vif/0 in dmesg). The Qubes networking page wasn't particularly helpful: > Firewall and Proxy VMs > > TODO :) Thanks. JJ -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/37ab7e172cc0de1fe99d859f7c0bad8c.webmail%40localhost. For more options, visit https://groups.google.com/d/optout.