W dniu środa, 31 sierpnia 2016 18:25:33 UTC+2 użytkownik pixel fairy napisał: > poured some epoxy over where the ram connects to the motherboard, and where > the clips are that you would use to take it out. the chips themselves dont > have any, just the surrounding pcb. > > this was couple days ago. so far its survived 2 reinstalls of test qubes > releases, and is doing one of rc3. > > i have this feeling im about to find out theres some simple way around this > and its not really a protection against cold boot attacks. i know some > laptops have easy bios resets, so thats one way.
An actual protection would be some kind of a chemical that would destroy the ram chips if they ever reach certain (lower than room) temperature. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/37b7279f-2f8b-4f74-97d7-46171c02a7b5%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.