I dowloaded the last stable version from https://www.qubes-os.org/downloads/#qubes-live-usb-alpha/, which is Qubes R3.1 x86_64, checked the signatures and all that, and created an USB installation device using "dd if=Qubes-R3-x86_64.iso of=/dev/sdX" as instructed in https://www.qubes-os.org/doc/installation-guide/. I rebooted the computer and, after que installation wizard started, I selected "test media & install qubes". The test returned no errors after verification of 100% of the USB stick, and immediately after that a black screen with the qubes symbol and some sort of progress bar have shown up, with the progress set about half of total. The problem is that after 5, 10, 15 minutes nothing happens, and no error messages are given. Apparently my laptop fulfills all hardware requirements shown in https://www.qubes-os.org/doc/system-requirements/, with my processor being Intel(R) Core(TM) i7-6500U which, according to http://ark.intel.com/products/88194/Intel-Core-i7-6500U-Processor-4M-Cache-up-to-3_10-GHz, has both Intel VT-x and VT-d technologies. Does anyone has any advice? Thank you...
-- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/e67ba4c6-545b-4e33-8b83-4c559659cbe0%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
