I have been doing some tests using a GTX 1070, on Qubes R3.2, I think it is 
fair to say GTX 900 and 1000 series cards are unusable right now going by user 

Booting in BIOS mode without self-test:
Starting installer, one moment...
*black screen*

Booting in BIOS mode with self-test:
Starting installer, one moment...
*scrolls too fast to read*
17:47:03 Not asking for VNC because we don't have a network
17:47:03 X startup failed, falling back to text mode

Then I am placed in the anaconda CLI install. Trying to go through with the CLI 
installer fails while trying to set an install destination. Selecting LUKS 
results in the following errors:

Generating updated storage configureation
storage configuration failed: autopart failed:
Encryption requested for LUKS device sdc2 but no encryption key specified for 
the device.

Booting using UEFI doesn't work either. It shows the 4 tux images and says:

[       0.000000] efi: EFI_MEMMAP is not enabled.
[       0.000000] esrt: ESRT header is not in the memory map.
[       5.760317] dracut-pre-trigger[401]: cat: /tmp/dd_disk: No such file or 
[       37.945613] hid-generic 0003:1044:7A03.0008: item 0 1 0 8 parsing failed
[       38.003314] hid-generic 0003:1044:7A03.0008: No inputs registered, 
[       39.170611] sd 6:0:0:0: alua: Attach failed (-22)
{       9.139264] dracut-initqueue[506]: mount: /dev/sdd is write-protected, 
mounting read-only

The display then freezes, trying to switch tty doesn't show any effect.

I think this has something to do with nouveau. Searching around shows nouveau 
only got support for the GTX 1000 series in July. Perhaps Qubes is using an 
outdated version?

You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
For more options, visit https://groups.google.com/d/optout.

Reply via email to