On Sun, 18 Sep 2016 19:40:49 +0200, yaqu <qubesus...@openmailbox.org>
wrote:

> Hello,
> 
> After upgrading from R3.0 to R3.2-rc3, I am no longer able to hotplug
> ExpressCard devices (e.g. USB 3.0 adapter). Is it a bug or feature?
> 
> When I connect adapter to running Qubes, nothing happens - it is not
> detected, not reported by lspci, also there is nothing in dmesg.
> 
> When I boot Qubes with already connected adapter, it is properly
> detected, attached to dom0, and works fine. But if I disconnect it,
> it is still reported by lspci as connected.
> 
> As a workaround, I have to manually rescan PCI bus after connecting
> adapter:
> $ sudo sh -c 'echo 1 > /sys/bus/pci/rescan'
> 
> And manually remove it after disconnecting:
> $ sudo sh -c 'echo 1 > /sys/bus/pci/devices/0000:05:00.0/remove'
> 
> It works, but it is not very handy :-(

I'm resending this mail, it looks like it was filtered out or stuck in
moderation queue...

Meanwhile, I've found out it's a feature:
https://github.com/QubesOS/qubes-issues/issues/1673

-- 
yaqu

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/20160919132332.BE1D4202637%40mail.openmailbox.org.
For more options, visit https://groups.google.com/d/optout.

Reply via email to