Hi JJ,

Did some more testing, you were right, I only have 3.

I have 2 bus's on the motherboard...
I plugged a USB drive into each set to find out which were which.

But that doesn't explain why it isn't working when I even just attach my USB3 
card to the USBVM.

That alone should work, but it doesn't.

So this means I should be able to attach the USB3 card, and the 4 other USB to 
the USBVM, leaving 2 attached to Dom0 for my use.

So why does it have the error?

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/96751700-6a17-4829-b224-5ee6841a2c39%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
/:  Bus 10.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M #(Back ports 
1-2)
    |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
    |__ Port 2: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
    |__ Port 2: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M

# bus 02-09 USB3 PCIE card (4 ports)
/:  Bus 09.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 08.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M
    |__ Port 2: Dev 9, If 0, Class=Mass Storage, Driver=usb-storage, 480M  # 
USB HDD. USB3 card
    |__ Port 3: Dev 2, If 0, Class=Hub, Driver=hub/3p, 480M
        |__ Port 1: Dev 3, If 0, Class=Hub, Driver=hub/3p, 480M
            |__ Port 1: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 
480M
            |__ Port 3: Dev 11, If 0, Class=Mass Storage, Driver=usb-storage, 
480M  # USB HDD. Monitor SIDE 2 ports
        |__ Port 3: Dev 13, If 0, Class=Mass Storage, Driver=usb-storage, 480M  
# USB HDD. Monitor UNDERNEATH 2 ports
            
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
    |__ Port 3: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 480M  # 
USB HDD. #(Back ports 3-4 , Front 2 ports)


Reply via email to