Hash: SHA256

On Sat, Dec 03, 2016 at 04:14:48PM -0800, Benjamin Richter wrote:
> I have revisited an earlier approach with some more success.
> I attached only the usb controller, not the bridges. This seems to work:
> sudo lspci
> 00:00.0 USB controller: Intel Corporation DSL6340 USB 3.1 Controller [Alpine 
> Ridge]
> 00:01.0 Network controller: Intel Corporation Wireless 7265 (rev 59)
> sudo lsusb
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 002 Device 007: ID 046d:c51e Logitech, Inc. 
> Bus 002 Device 006: ID 1e4e:0898 Cubeternet 
> Bus 002 Device 005: ID 0572:1703 Conexant Systems (Rockwell), Inc. 
> Bus 002 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
> Bus 002 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> So some devices are there, like the SD card reader, audio device and the usb 
> hubs. The usb hubs even work, the Logitec device is an external keyboard I 
> connected.
> But the ethernet device is not there, nor the usb ethernet dongle that's also 
> connected to the usb hub. Both show up on dom0 if I connect them, but since 
> dom0 has no networking, I cannot say if they would work.

Maybe those are on the other USB controller - 00:14.0 ? Try attaching
that too to the sys-net.

- -- 
Best Regards,
Marek Marczykowski-Górecki
Invisible Things Lab
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
Version: GnuPG v2


You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
For more options, visit https://groups.google.com/d/optout.

Reply via email to