Am Sonntag, 4. Dezember 2016 01:19:45 UTC+1 schrieb Marek Marczykowski-Górecki: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA256 > > On Sat, Dec 03, 2016 at 04:14:48PM -0800, Benjamin Richter wrote: > > I have revisited an earlier approach with some more success. > > I attached only the usb controller, not the bridges. This seems to work: > > > > sudo lspci > > 00:00.0 USB controller: Intel Corporation DSL6340 USB 3.1 Controller > > [Alpine Ridge] > > 00:01.0 Network controller: Intel Corporation Wireless 7265 (rev 59) > > > > sudo lsusb > > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub > > Bus 002 Device 007: ID 046d:c51e Logitech, Inc. > > Bus 002 Device 006: ID 1e4e:0898 Cubeternet > > Bus 002 Device 005: ID 0572:1703 Conexant Systems (Rockwell), Inc. > > Bus 002 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub > > Bus 002 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub > > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > > > So some devices are there, like the SD card reader, audio device and the > > usb hubs. The usb hubs even work, the Logitec device is an external > > keyboard I connected. > > > > But the ethernet device is not there, nor the usb ethernet dongle that's > > also connected to the usb hub. Both show up on dom0 if I connect them, but > > since dom0 has no networking, I cannot say if they would work. > > Maybe those are on the other USB controller - 00:14.0 ? Try attaching > that too to the sys-net. > > - -- > Best Regards, > Marek Marczykowski-Górecki > Invisible Things Lab > A: Because it messes up the order in which people normally read text. > Q: Why is top-posting such a bad thing? > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v2 > > iQEcBAEBCAAGBQJYQ2EbAAoJENuP0xzK19cs1wwH/3jZh8JqNh1tqPJmaCxYzBA1 > nmCNJbZ7GDXk19ZJDfMeDsmaZ3OilvhjimAKf/43lvJMjQuzyneCjOwWW6Tef4zQ > CRPb3gVdiE5DdJ1Gq5Yz93VRP41Y26eN26SIKEk6TQAHJCuC9ydrIFC32oi6imsG > H+621Iv4f9zPiPta24fmoFQs2NdfAWZX6NHZpIXUULPZx5DncUsYwLRUttXUEIgg > pgMJGbdsC6X8iRJIT3CpSZcRRgpJJNIdEeiPtk2odbB2yzeL3sapCmZiJAs0iOjw > XMdKRfK9utExA8GH27Tkesiab7HR/PlHO8w2ztphLWxMmNLMEdMGSHQ4xXQM5kM= > =LgKq > -----END PGP SIGNATURE-----
No, that's the integrated controller, which is the source of the trouble, since it also is used for keyboard and touchpad/touchscreen, so I cannot attach that to a VM. I've attached the ethernet dongle to the same port as the logitech keyboard, but it does not show up anywhere. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to email@example.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/b0123d96-1802-491d-89d7-3c54dcc65c8e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.