-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

On Sat, Dec 03, 2016 at 04:24:05PM -0800, Benjamin Richter wrote:
> Am Sonntag, 4. Dezember 2016 01:19:45 UTC+1 schrieb Marek 
> Marczykowski-Górecki:
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA256
> > 
> > On Sat, Dec 03, 2016 at 04:14:48PM -0800, Benjamin Richter wrote:
> > > I have revisited an earlier approach with some more success.
> > > I attached only the usb controller, not the bridges. This seems to work:
> > > 
> > > sudo lspci
> > > 00:00.0 USB controller: Intel Corporation DSL6340 USB 3.1 Controller 
> > > [Alpine Ridge]
> > > 00:01.0 Network controller: Intel Corporation Wireless 7265 (rev 59)
> > > 
> > > sudo lsusb
> > > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> > > Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> > > Bus 002 Device 007: ID 046d:c51e Logitech, Inc. 
> > > Bus 002 Device 006: ID 1e4e:0898 Cubeternet 
> > > Bus 002 Device 005: ID 0572:1703 Conexant Systems (Rockwell), Inc. 
> > > Bus 002 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
> > > Bus 002 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
> > > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> > > 
> > > So some devices are there, like the SD card reader, audio device and the 
> > > usb hubs. The usb hubs even work, the Logitec device is an external 
> > > keyboard I connected.
> > > 
> > > But the ethernet device is not there, nor the usb ethernet dongle that's 
> > > also connected to the usb hub. Both show up on dom0 if I connect them, 
> > > but since dom0 has no networking, I cannot say if they would work.
> > 
> > Maybe those are on the other USB controller - 00:14.0 ? Try attaching
> > that too to the sys-net.
> 
> No, that's the integrated controller, which is the source of the trouble, 
> since it also is used for keyboard and touchpad/touchscreen, so I cannot 
> attach that to a VM.
> 
> I've attached the ethernet dongle to the same port as the logitech keyboard, 
> but it does not show up anywhere.

If you see the device in dom0 in some configuration, take a look at its
sysfs path - it will have a hint on which controller is it. Like this:
lrwxrwxrwx 1 root root 0 Dec  4 01:32 /sys/bus/usb/devices/3-1 ->
../../../devices/pci-0/pci0000:00/0000:00:02.0/usb3/3-1

- -- 
Best Regards,
Marek Marczykowski-Górecki
Invisible Things Lab
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2

iQEcBAEBCAAGBQJYQ2RWAAoJENuP0xzK19csKxMH/3rkY6pxlWVSjltPRc1r2jGn
njWyqDEA6Zoe56gAQ3zS1ORX54hgpEw6omZgzB3bY9KI2U3ihLncJ4jF8mVwxa+S
rTCFF1Flqp8Olk2jTXc2lobdLcOQBMQXXfNq4GbpHkl0C+ZVIa1n7lndfJI9WA21
TKA3gsW/SY8EgBjYtFO0Emnhr5WMi3jYyt/qSWU8jrYn92IoZnx6CbpQp8xA/S8L
KLvt7WUnBjuFX+k4z9hodXHq6eU00YNqOEI4fm0+y92PPSjIGKbDhClCstSMMXRE
RqlbJmWpBasYBPm2pOg+1C0Vkeg593TtxahLd2k8MuFZUjrCjY4OXwA7+YkHFRA=
=4hF8
-----END PGP SIGNATURE-----

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/20161204003326.GK1145%40mail-itl.
For more options, visit https://groups.google.com/d/optout.

Reply via email to