On Tuesday, January 3, 2017 at 10:09:22 PM UTC-5, wes....@gmail.com wrote: > Hello Qubes World. > > I have spent the better part of 5-6 hours trying to figure out why my > wifi will not show up in sys-net, it has never worked. I have read through > every forum/post I could find and wasn't able to figure out the exact issue. > I feel as if this is my last resort, I have to travel in a few weeks and if I > can't get it working I'll have to abandon my 3 week qubes exerience. I'll > provide as much information as possible to aid in troubleshooting. Appreciate > any help given, thanks. > > Laptop: Acer Aspire E 15 E5-575G-76YK > > When I first start sys-net I typically have to kill it a couple times > before it will even recognize my ethernet..what a pain. As for the Wifi I run > dmesg and dont see any errors regarding that the device has failed....but i'm > not really sure what to look for... I will post the output below ...can't > figure out how to make a link to it yet so sorry for the expanded output. > I've attempted to manually add the Wifi SSID and crap through the Network > Manager and that didn't work either. It appears that it just isn't loading > when sys-net starts up even though I've added the device in the devices tab. > A lot of the ubuntu forums say to install "linux-headers-generic" and > "build-essential" but those aren't listed in the repo > > The output of lspci shows the wireless adapter but one thing that I noticed > is that it doesn't say "Kernel driver in use" like the others say (part of > the problem?) > > 00:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless > Network Adapter [168c:0042] (rev 30) > Subsystem: Lite-On Communications Inc Device [11ad:0806] > Kernel modules: ath10k_pci > > The drivers are installed as listed in /lib/firmware/ath10k/QCA9377/hw1.0 > > sudo modprobe -D ath10k_pci > > insmod /lib/modules/4.4.31-11.pvops.qubes.x86_64/kernel/net/rfkill/rfkill.ko > insmod /lib/modules/ > 4.4.31-11.pvops.qubes.x86_64/kernel/net/wireless/cfg80211.ko > insmod > /lib/modules/4.4.31-11.pvops.qubes.x86_64/kernel/net/mac80211/mac80211.ko > insmod/lib/modules/4.4.31-11.pvops.qubes.x86_64/kernel/drivers/net/wireless/ath/ath.ko > > insmod > /lib/modules/4.4.31-11.pvops.qubes.x86_64/kernel/drivers/net/wireless/ath/ath10k/ath10k_core.ko > > insmod > /lib/modules/4.4.31-11.pvops.qubes.x86_64/kernel/drivers/net/wireless/ath/ath10k/ath10k_pci.ko > > > > Current linux firmware is 20160923-68.git42ad5367.fc24.noarch > > When I run the command "nmcli g" it shows the wifi enabled and wwan enabled. > > STATE CONNECTIVITY WIFI-HW WIFI WWAN-HW WWAN > connected full enabled enabled enabled enabled > > ifconfig output: > enp0s1f1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > inet 192.168.1.60 netmask 255.255.255.0 broadcast 192.168.1.255 > inet6 fe80::b353:2725:5528:1f78 prefixlen 64 scopeid 0x20<link> > ether 54:ab:3a:81:38:24 txqueuelen 1000 (Ethernet) > RX packets 25634 bytes 32481540 (30.9 MiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 13396 bytes 1586775 (1.5 MiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 > inet 127.0.0.1 netmask 255.0.0.0 > inet6 ::1 prefixlen 128 scopeid 0x10<host> > loop txqueuelen 1 (Local Loopback) > RX packets 84 bytes 8028 (7.8 KiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 84 bytes 8028 (7.8 KiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > vif5.0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > inet 10.137.1.1 netmask 255.255.255.255 broadcast 0.0.0.0 > inet6 fe80::fcff:ffff:feff:ffff prefixlen 64 scopeid 0x20<link> > ether fe:ff:ff:ff:ff:ff txqueuelen 32 (Ethernet) > RX packets 13246 bytes 1385694 (1.3 MiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 24267 bytes 32251590 (30.7 MiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > I've attempted to install the kvalo ath10k firmware listed on github but it > did no good. md5sums of the files were the same as what I had anyways > > modinfo ath10k_pci produces the following output > > filename: /lib/modules/4.4.31- > 11.pvops.qubes.x86_64/kernel/drivers/net/wireless/ath/ath10k/ ath10k_pci.ko > firmware: ath10k/QCA9377/hw1.0/board.bin > firmware: ath10k/QCA9377/hw1.0/firmware-5.bin > firmware: ath10k/QCA6174/hw3.0/board-2.bin > firmware: ath10k/QCA6174/hw3.0/board.bin > firmware: ath10k/QCA6174/hw3.0/firmware-5.bin > firmware: ath10k/QCA6174/hw3.0/firmware-4.bin > firmware: ath10k/QCA6174/hw2.1/board-2.bin > firmware: ath10k/QCA6174/hw2.1/board.bin > firmware: ath10k/QCA6174/hw2.1/firmware-5.bin > firmware: ath10k/QCA6174/hw2.1/firmware-4.bin > firmware: ath10k/QCA988X/hw2.0/board-2.bin > firmware: ath10k/QCA988X/hw2.0/board.bin > firmware: ath10k/QCA988X/hw2.0/firmware-5.bin > firmware: ath10k/QCA988X/hw2.0/firmware-4.bin > firmware: ath10k/QCA988X/hw2.0/firmware-3.bin > firmware: ath10k/QCA988X/hw2.0/firmware-2.bin > firmware: ath10k/QCA988X/hw2.0/firmware.bin > license: Dual BSD/GPL > description: Driver support for Atheros QCA988X PCIe devices > author: Qualcomm Atheros > alias: pci:v0000168Cd00000042sv*sd*bc*sc*i* > alias: pci:v0000168Cd00000040sv*sd*bc*sc*i* > alias: pci:v0000168Cd0000003Esv*sd*bc*sc*i* > alias: pci:v0000168Cd00000041sv*sd*bc*sc*i* > alias: pci:v0000168Cd0000003Csv*sd*bc*sc*i* > depends: ath10k_core > intree: Y > vermagic: 4.4.31-11.pvops.qubes.x86_64 SMP mod_unload > parm: irq_mode:0: auto, 1: legacy, 2: msi (default: 0) (uint) > parm: reset_mode:0: auto, 1: warm only (default: 0) (uint) > > > uname -a > > Linux sys-net 4.4.31-11.pvops.qubes.x86_64 #1 SMP Fri Nov 11 00:43:28 UTC > 2016 x86_64 x86_64 x86_64 GNU/Linux > > > lsmod > > Module Size Used by > iptable_raw 16384 1 > fuse 98304 3 > xt_nat 16384 4 > xen_netback 49152 1 > xt_REDIRECT 16384 1 > nf_nat_redirect 16384 1 xt_REDIRECT > ip6table_filter 16384 1 > ip6_tables 28672 1 ip6table_filter > xt_conntrack 16384 2 > ipt_MASQUERADE 16384 1 > nf_nat_masquerade_ipv4 16384 1 ipt_MASQUERADE > iptable_nat 16384 1 > nf_conntrack_ipv4 16384 3 > nf_defrag_ipv4 16384 1 nf_conntrack_ipv4 > nf_nat_ipv4 16384 1 iptable_nat > nf_nat 24576 4 > nt_nat_redirect,nf_nat_ipv4,xt_nat,nf_nat_masquerade_ipv4 > nf_conntrack 106496 5 > nf_nat,nf_nat_ipv4,xt_conntrack,nf_nat_masquerade_ipv4,nf_conntrack_ipv4 > ath10k_pci 45056 1 > ath10k_core 270336 1 ath10k_pci > ath 28672 1 ath10k_core > mac80211 708608 1 ath10k_core > cfg80211 557056 3 ath,mac80211,ath10k_core > rfkill 24576 2 cfg80211 > rtsx_pci 53248 1 > mfd_core 16384 1 rtsx_pci > r8169 81920 0 > mii 16384 1 r8169 > intel_rapl 20480 0 > iosf_mbi 16384 1 intel_rapl > x86_pkg_temp_thermal 16384 0 > coretemp 16384 0 > crct10dif_pclmul 16384 0 > crc32_pclmul 16384 0 > crc32c_intel 24576 0 > pcspkr 16384 0 > xen_pcifront 20480 0 > dummy_hcd 36864 0 > udc_core 24576 1 dummy_hcd > u2mfn 16384 0 > xen_blkback 45056 0 > xenfs 16384 1 > xen_privcmd 16384 9 xenfs > xen_blkfront 40960 6 > > > I will attempt to do a couple more things but I am at a complete loss. > Posting the output of dmesg below. If I can figure out a way to create a link > ill edit. Thanks. > > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Initializing cgroup subsys cpuacct > [ 0.000000] Linux version 4.4.31-11.pvops.qubes.x86_64 (user@release) (gcc > version 5.3.1 20160406 (Red Hat 5.3.1-6) (GCC) ) #1 SMP Fri Nov 11 00:43:28 > UTC 2016 > [ 0.000000] Command line: root=/dev/mapper/dmroot ro nomodeset > console=hvc0 rd_NO_PLYMOUTH rd.plymouth.enable=0 plymouth.enable=0 nopat > iommu=soft swiotlb=8192 > [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 > [ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64 > [ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64 > [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point > registers' > [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' > [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' > [ 0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers' > [ 0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR' > [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 1088 > bytes, using 'standard' format. > [ 0.000000] x86/fpu: Using 'eager' FPU context switches. > [ 0.000000] ACPI in unprivileged domain disabled > [ 0.000000] Released 0 page(s) > [ 0.000000] e820: BIOS-provided physical RAM map: > [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009ffff] usable > [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved > [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000031ffffff] usable > [ 0.000000] Xen: [mem 0x0000000032000000-0x000000006079bfff] unusable > [ 0.000000] Xen: [mem 0x000000006079c000-0x000000006079cfff] ACPI NVS > [ 0.000000] Xen: [mem 0x000000006079d000-0x00000000607c6fff] reserved > [ 0.000000] Xen: [mem 0x00000000607c7000-0x0000000060877fff] unusable > [ 0.000000] Xen: [mem 0x0000000060878000-0x0000000061178fff] reserved > [ 0.000000] Xen: [mem 0x0000000061179000-0x000000007738dfff] unusable > [ 0.000000] Xen: [mem 0x000000007738e000-0x0000000077d7dfff] reserved > [ 0.000000] Xen: [mem 0x0000000077d7e000-0x0000000077f7dfff] ACPI NVS > [ 0.000000] Xen: [mem 0x0000000077f7e000-0x0000000077ffdfff] ACPI data > [ 0.000000] Xen: [mem 0x0000000077ffe000-0x0000000077ffefff] unusable > [ 0.000000] Xen: [mem 0x0000000077fff000-0x00000000780fffff] reserved > [ 0.000000] Xen: [mem 0x0000000078800000-0x000000007d7fffff] reserved > [ 0.000000] Xen: [mem 0x00000000e0000000-0x00000000efffffff] reserved > [ 0.000000] Xen: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved > [ 0.000000] Xen: [mem 0x00000000feb00000-0x00000000feb03fff] reserved > [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved > [ 0.000000] Xen: [mem 0x00000000fed00000-0x00000000fed00fff] reserved > [ 0.000000] Xen: [mem 0x00000000fed10000-0x00000000fed19fff] reserved > [ 0.000000] Xen: [mem 0x00000000fed84000-0x00000000fed84fff] reserved > [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved > [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved > [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved > [ 0.000000] x86/PAT: PAT support disabled. > [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] DMI not present or invalid. > [ 0.000000] Hypervisor detected: Xen > [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved > [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable > [ 0.000000] e820: last_pfn = 0x32000 max_arch_pfn = 0x400000000 > [ 0.000000] MTRR: Disabled > [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 24576 > [ 0.000000] BRK [0x0202f000, 0x0202ffff] PGTABLE > [ 0.000000] BRK [0x02030000, 0x02030fff] PGTABLE > [ 0.000000] BRK [0x02031000, 0x02031fff] PGTABLE > [ 0.000000] BRK [0x02032000, 0x02032fff] PGTABLE > [ 0.000000] BRK [0x02033000, 0x02033fff] PGTABLE > [ 0.000000] BRK [0x02034000, 0x02034fff] PGTABLE > [ 0.000000] RAMDISK: [mem 0x02056000-0x02b16fff] > [ 0.000000] NUMA turned off > [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000031ffffff] > [ 0.000000] NODE_DATA(0) allocated [mem 0x31e7c000-0x31e8dfff] > [ 0.000000] Zone ranges: > [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] > [ 0.000000] DMA32 [mem 0x0000000001000000-0x0000000031ffffff] > [ 0.000000] Normal empty > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] > [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000031ffffff] > [ 0.000000] Initmem setup node 0 [mem > 0x0000000000001000-0x0000000031ffffff] > [ 0.000000] On node 0 totalpages: 204703 > [ 0.000000] DMA zone: 64 pages used for memmap > [ 0.000000] DMA zone: 21 pages reserved > [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 3136 pages used for memmap > [ 0.000000] DMA32 zone: 200704 pages, LIFO batch:31 > [ 0.000000] p2m virtual area at ffffc90000000000, size is 200000 > [ 0.000000] Remapped 0 page(s) > [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org > [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs > [ 0.000000] e820: [mem 0x7d800000-0xdfffffff] available for PCI devices > [ 0.000000] Booting paravirtualized kernel on Xen > [ 0.000000] Xen version: 4.6.3 (preserve-AD) > [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: > 0xffffffff, max_idle_ns: 1910969940391419 ns > [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 > nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 34 pages/cpu @ffff880031800000 s98392 r8192 > d32680 u1048576 > [ 0.000000] pcpu-alloc: s98392 r8192 d32680 u1048576 alloc=1*2097152 > [ 0.000000] pcpu-alloc: [0] 0 1 > [ 0.000000] xen: PV spinlocks enabled > [ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) > [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total > pages: 201482 > [ 0.000000] Policy zone: DMA32 > [ 0.000000] Kernel command line: root=/dev/mapper/dmroot ro nomodeset > console=hvc0 rd_NO_PLYMOUTH rd.plymouth.enable=0 plymouth.enable=0 nopat > iommu=soft swiotlb=8192 > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] software IO TLB [mem 0x2f800000-0x30800000] (16MB) mapped at > [ffff88002f800000-ffff8800307fffff] > [ 0.000000] Memory: 756412K/818812K available (7540K kernel code, 1249K > rwdata, 3412K rodata, 1528K init, 1472K bss, 62400K reserved, 0K cma-reserved) > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] Build-time adjustment of leaf fanout to 64. > [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2. > [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 > [ 0.000000] Using NULL legacy PIC > [ 0.000000] NR_IRQS:4352 nr_irqs:48 0 > [ 0.000000] xen:events: Using FIFO-based ABI > [ 0.000000] Offload RCU callbacks from all CPUs > [ 0.000000] Offload RCU callbacks from CPUs: 0-1. > [ 0.000000] Console: colour dummy device 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] console [hvc0] enabled > [ 0.000000] clocksource: xen: mask: 0xffffffffffffffff max_cycles: > 0x1cd42e4dffb, max_idle_ns: 881590591483 ns > [ 0.000000] Xen: using vcpuop timer interface > [ 0.000000] installing Xen timer for CPU 0 > [ 0.000000] tsc: Detected 2597.696 MHz processor > [ 0.001000] Calibrating delay loop (skipped), value calculated using timer > frequency.. 5195.39 BogoMIPS (lpj=2597696) > [ 0.001000] pid_max: default: 32768 minimum: 301 > [ 0.001000] Security Framework initialized > [ 0.001000] AppArmor: AppArmor disabled by boot time parameter > [ 0.001000] Dentry cache hash table entries: 131072 (order: 8, 1048576 > bytes) > [ 0.001000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) > [ 0.001000] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) > [ 0.001000] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 > bytes) > [ 0.001000] Initializing cgroup subsys io > [ 0.001000] Initializing cgroup subsys memory > [ 0.001025] Initializing cgroup subsys devices > [ 0.001032] Initializing cgroup subsys freezer > [ 0.001037] Initializing cgroup subsys net_cls > [ 0.001042] Initializing cgroup subsys perf_event > [ 0.001048] Initializing cgroup subsys net_prio > [ 0.001053] Initializing cgroup subsys hugetlb > [ 0.001059] Initializing cgroup subsys pids > [ 0.001112] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' > [ 0.001117] ENERGY_PERF_BIAS: View and update with > x86_energy_perf_policy(8) > [ 0.001123] CPU: Physical Processor ID: 0 > [ 0.001125] CPU: Processor Core ID: 1 > [ 0.002204] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 > [ 0.002209] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 > [ 0.031418] ftrace: allocating 28744 entries in 113 pages > [ 0.036044] cpu 0 spinlock event irq 1 > [ 0.036052] Could not initialize VPMU for cpu 0, error -95 > [ 0.036105] Performance Events: unsupported p6 CPU model 78 no PMU driver, > software events only. > [ 0.036591] NMI watchdog: disabled (cpu0): hardware events not enabled > [ 0.036597] NMI watchdog: Shutting down hard lockup detector on all cpus > [ 0.036678] SMP alternatives: switching to SMP code > [ 0.059009] installing Xen timer for CPU 1 > [ 0.059024] cpu 1 spinlock event irq 8 > [ 0.060227] x86: Booted up 1 node, 2 CPUs > [ 0.060275] devtmpfs: initialized > [ 0.061040] PM: Registering ACPI NVS region [mem 0x6079c000-0x6079cfff] > (4096 bytes) > [ 0.061047] PM: Registering ACPI NVS region [mem 0x77d7e000-0x77f7dfff] > (2097152 bytes) > [ 0.061126] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, > max_idle_ns: 1911260446275000 ns > [ 0.061167] atomic64_test: passed for x86-64 platform with CX8 and with SSE > [ 0.061167] pinctrl core: initialized pinctrl subsystem > [ 0.081517] RTC time: 165:165:165, date: 165/165/65 > [ 0.081646] NET: Registered protocol family 16 > [ 0.081658] xen:grant_table: Grant tables using version 1 layout > [ 0.081668] Grant table initialized > [ 0.082460] PCI: setting up Xen PCI frontend stub > [ 0.082466] PCI: pci_cache_line_size set to 64 bytes > [ 0.085059] ACPI: Interpreter disabled. > [ 0.085059] xen:balloon: Initialising balloon driver > [ 0.086021] xen_balloon: Initialising balloon driver > [ 0.086066] vgaarb: loaded > [ 0.086104] SCSI subsystem initialized > [ 0.086119] libata version 3.00 loaded. > [ 0.086119] usbcore: registered new interface driver usbfs > [ 0.086119] usbcore: registered new interface driver hub > [ 0.086119] usbcore: registered new device driver usb > [ 0.087012] dmi: Firmware registration failed. > [ 0.087046] PCI: System does not support PCI > [ 0.087046] PCI: System does not support PCI > [ 0.087073] NetLabel: Initializing > [ 0.087077] NetLabel: domain hash size = 128 > [ 0.087080] NetLabel: protocols = UNLABELED CIPSOv4 > [ 0.087094] NetLabel: unlabeled traffic allowed by default > [ 0.087141] amd_nb: Cannot enumerate AMD northbridges > [ 0.087168] clocksource: Switched to clocksource xen > [ 0.091751] pnp: PnP ACPI: disabled > [ 0.093642] NET: Registered protocol family 2 > [ 0.093751] TCP established hash table entries: 8192 (order: 4, 65536 > bytes) > [ 0.093776] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) > [ 0.093789] TCP: Hash tables configured (established 8192 bind 8192) > [ 0.093806] UDP hash table entries: 512 (order: 2, 16384 bytes) > [ 0.093813] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) > [ 0.093850] NET: Registered protocol family 1 > [ 0.093860] PCI: CLS 0 bytes, default 64 > [ 0.093910] Unpacking initramfs... > [ 0.101002] Freeing initrd memory: 11012K (ffff880002056000 - > ffff880002b17000) > [ 0.101476] futex hash table entries: 512 (order: 3, 32768 bytes) > [ 0.101505] audit: initializing netlink subsys (disabled) > [ 0.101519] audit: type=2000 audit(1483492881.562:1): initialized > [ 0.101684] Initialise system trusted keyring > [ 0.102722] zbud: loaded > [ 0.102926] VFS: Disk quotas dquot_6.6.0 > [ 0.102954] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 0.103150] hugetlbfs: disabling because there are no supported hugepage > sizes > [ 0.103236] Key type big_key registered > [ 0.106679] NET: Registered protocol family 38 > [ 0.106688] Key type asymmetric registered > [ 0.106692] Asymmetric key parser 'x509' registered > [ 0.106724] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 250) > [ 0.106770] io scheduler noop registered > [ 0.106774] io scheduler deadline registered > [ 0.106813] io scheduler cfq registered (default) > [ 0.106873] intel_idle: does not run on family 6 model 78 > [ 0.106971] xen:xen_evtchn: Event-channel device installed > [ 0.107264] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 0.107565] Non-volatile memory driver v1.3 > [ 0.107604] Linux agpgart interface v0.103 > [ 0.107843] libphy: Fixed MDIO Bus: probed > [ 0.107888] usbcore: registered new interface driver usbserial > [ 0.215229] usbcore: registered new interface driver usbserial_generic > [ 0.215239] usbserial: USB Serial support registered for generic > [ 0.215262] i8042: PNP: No PS/2 controller found. Probing ports directly. > [ 1.231033] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: > 0x2571bb9db05, max_idle_ns: 440795325099 ns > [ 1.231189] i8042: No controller found > [ 1.231350] mousedev: PS/2 mouse device common for all mice > [ 1.231453] device-mapper: uevent: version 1.0.3 > [ 1.231527] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: > dm-devel @ redhat.com > [ 1.231608] dmi-sysfs: dmi entry is absent. > [ 1.231634] hidraw: raw HID events driver (C) Jiri Kosina > [ 1.231689] usbcore: registered new interface driver usbhid > [ 1.231693] usbhid: USB HID core driver > [ 1.231755] drop_monitor: Initializing network drop monitor service > [ 1.231815] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 1.232021] Initializing XFRM netlink socket > [ 1.232126] NET: Registered protocol family 10 > [ 1.232309] mip6: Mobile IPv6 > [ 1.232329] NET: Registered protocol family 17 > [ 1.232353] mce: Unable to init device /dev/mcelog (rc: -5) > [ 1.232446] AVX2 version of gcm_enc/dec engaged. > [ 1.232450] AES CTR mode by8 optimization enabled > [ 1.253423] registered taskstats version 1 > [ 1.253445] Loading compiled-in X.509 certificates > [ 1.253474] zswap: loaded using pool lzo/zbud > [ 1.253535] xenbus_probe_frontend: Device with no driver: device/vbd/51712 > [ 1.253539] xenbus_probe_frontend: Device with no driver: device/vbd/51728 > [ 1.253543] xenbus_probe_frontend: Device with no driver: device/vbd/51744 > [ 1.253548] xenbus_probe_frontend: Device with no driver: device/vbd/51760 > [ 1.253565] xenbus_probe_frontend: Device with no driver: device/pci/0 > [ 1.253631] Magic number: 1:252:3141 > [ 1.253651] hctosys: unable to open rtc device (rtc0) > [ 1.254249] Freeing unused kernel memory: 1528K (ffffffff81d3a000 - > ffffffff81eb8000) > [ 1.254256] Write protecting the kernel read-only data: 12288k > [ 1.256861] Freeing unused kernel memory: 640K (ffff880001760000 - > ffff880001800000) > [ 1.257154] Freeing unused kernel memory: 684K (ffff880001b55000 - > ffff880001c00000) > [ 1.260042] random: modprobe: uninitialized urandom read (8 bytes read, 61 > bits of entropy available) > [ 1.279922] blkfront: xvda: flush diskcache: enabled; persistent grants: > enabled; indirect descriptors: enabled; > [ 1.282968] blkfront: xvdb: flush diskcache: enabled; persistent grants: > enabled; indirect descriptors: enabled; > [ 1.290801] blkfront: xvdc: flush diskcache: enabled; persistent grants: > enabled; indirect descriptors: enabled; > [ 1.296442] blkfront: xvdd: barrier or flush: disabled; persistent grants: > enabled; indirect descriptors: enabled; > [ 1.372130] random: cat: uninitialized urandom read (8 bytes read, 89 bits > of entropy available) > [ 1.374276] random: cat: uninitialized urandom read (8 bytes read, 91 bits > of entropy available) > [ 1.376298] random: cat: uninitialized urandom read (8 bytes read, 91 bits > of entropy available) > [ 1.387265] random: sfdisk: uninitialized urandom read (4 bytes read, 93 > bits of entropy available) > [ 1.387438] xvdc: xvdc1 xvdc2 > [ 1.392780] random: mkswap: uninitialized urandom read (8 bytes read, 95 > bits of entropy available) > [ 1.392922] random: mkswap: uninitialized urandom read (16 bytes read, 95 > bits of entropy available) > [ 1.397899] random: cat: uninitialized urandom read (8 bytes read, 95 bits > of entropy available) > [ 1.403641] random: modprobe: uninitialized urandom read (8 bytes read, 95 > bits of entropy available) > [ 1.404300] random: mkdir: uninitialized urandom read (8 bytes read, 95 > bits of entropy available) > [ 1.404990] EXT4-fs (dm-0): couldn't mount as ext3 due to feature > incompatibilities > [ 1.405057] EXT4-fs (dm-0): couldn't mount as ext2 due to feature > incompatibilities > [ 1.406126] EXT4-fs (dm-0): mounted filesystem with ordered data mode. > Opts: (null) > [ 1.433807] EXT4-fs (xvdd): mounting ext3 file system using the ext4 > subsystem > [ 1.434656] EXT4-fs (xvdd): mounted filesystem with ordered data mode. > Opts: (null) > [ 1.489531] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT > +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS > +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) > [ 1.489565] systemd[1]: Detected virtualization xen. > [ 1.489574] systemd[1]: Detected architecture x86-64. > [ 1.489900] systemd[1]: No hostname configured. > [ 1.489909] systemd[1]: Set hostname to <localhost>. > [ 1.524997] random: nonblocking pool is initialized > [ 1.544649] systemd[1]: Reached target Remote File Systems. > [ 1.544850] systemd[1]: Listening on Journal Audit Socket. > [ 1.544946] systemd[1]: Reached target Encrypted Volumes. > [ 1.545053] systemd[1]: Listening on udev Control Socket. > [ 1.545132] systemd[1]: Started Forward Password Requests to Wall > Directory Watch. > [ 1.545217] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. > [ 1.545295] systemd[1]: Started Dispatch Password Requests to Console > Directory Watch. > [ 1.545355] systemd[1]: Listening on udev Kernel Socket. > [ 1.545687] systemd[1]: Created slice User and Session Slice. > [ 1.545769] systemd[1]: Listening on Journal Socket. > [ 1.546348] systemd[1]: Listening on Process Core Dump Socket. > [ 1.546494] systemd[1]: Created slice System Slice. > [ 1.554150] systemd[1]: Mounting /proc/xen... > [ 1.555241] systemd[1]: Starting File System Check on Root Device... > [ 1.559030] systemd[1]: Starting Load legacy module configuration... > [ 1.559385] systemd[1]: Created slice system-getty.slice. > [ 1.563027] systemd[1]: Starting Setup Virtual Console... > [ 1.565934] systemd[1]: Mounting Debug File System... > [ 1.568243] systemd[1]: Mounting POSIX Message Queue File System... > [ 1.570181] systemd[1]: Reached target Slices. > [ 1.646120] systemd[1]: Starting Create list of required static device > nodes for the current kernel... > [ 1.648790] systemd[1]: Starting Load Kernel Modules... > [ 1.649288] systemd[1]: Created slice system-serial\x2dgetty.slice. > [ 1.650893] systemd[1]: Listening on Journal Socket (/dev/log). > [ 1.652901] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May > 2005 > [ 1.652911] dummy_hcd dummy_hcd.0: Dummy host controller > [ 1.652956] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus > number 1 > [ 1.652998] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 1.653012] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.653019] usb usb1: Product: Dummy host controller > [ 1.653024] usb usb1: Manufacturer: Linux 4.4.31-11.pvops.qubes.x86_64 > dummy_hcd > [ 1.653031] usb usb1: SerialNumber: dummy_hcd.0 > [ 1.653115] hub 1-0:1.0: USB hub found > [ 1.653127] hub 1-0:1.0: 1 port detected > [ 1.654220] systemd[1]: Starting Journal Service... > [ 1.655024] systemd[1]: tmp.mount: Directory /tmp to mount over is not > empty, mounting anyway. > [ 1.656023] systemd[1]: Mounting Temporary Directory... > [ 1.656256] systemd[1]: Set up automount Arbitrary Executable File Formats > File System Automount Point. > [ 1.658974] systemd[1]: Mounted Debug File System. > [ 1.659539] systemd[1]: Mounted POSIX Message Queue File System. > [ 1.659600] systemd[1]: Mounted Temporary Directory. > [ 1.659653] systemd[1]: Mounted /proc/xen. > [ 1.659954] systemd[1]: Started File System Check on Root Device. > [ 1.660753] systemd[1]: Started Load legacy module configuration. > [ 1.660988] systemd[1]: Started Setup Virtual Console. > [ 1.661313] systemd[1]: Started Create list of required static device > nodes for the current kernel. > [ 1.661540] systemd[1]: Started Load Kernel Modules. > [ 1.662712] audit: type=1130 audit(1483492883.123:2): pid=1 uid=0 > auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" > exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 1.668851] systemd[1]: Started Journal Service. > [ 1.668979] audit: type=1130 audit(1483492883.129:3): pid=1 uid=0 > auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" > exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 1.887711] audit: type=1130 audit(1483492883.348:4): pid=1 uid=0 > auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" > exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 1.893214] audit: type=1130 audit(1483492883.354:5): pid=1 uid=0 > auid=4294967295 ses=4294967295 msg='unit=qubes-db comm="systemd" > exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 1.901200] EXT4-fs (dm-0): re-mounted. Opts: (null) > [ 1.902778] audit: type=1130 audit(1483492883.363:6): pid=1 uid=0 > auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" > exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 1.949629] audit: type=1130 audit(1483492883.410:7): pid=1 uid=0 > auid=4294967295 ses=4294967295 msg='unit=fedora-readonly comm="systemd" > exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 1.955160] audit: type=1130 audit(1483492883.416:8): pid=1 uid=0 > auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev > comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? > res=success' > [ 1.987003] systemd-journald[204]: Received request to flush runtime > journal from PID 1 > [ 2.028201] audit: type=1130 audit(1483492883.489:9): pid=1 uid=0 > auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" > exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 2.031126] audit: type=1130 audit(1483492883.492:10): pid=1 uid=0 > auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" > exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 2.116984] pcifront pci-0: Installing PCI frontend > [ 2.117235] pcifront pci-0: Creating PCI Frontend Bus 0000:00 > [ 2.117275] pcifront pci-0: PCI host bridge to bus 0000:00 > [ 2.117282] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] > [ 2.117287] pci_bus 0000:00: root bus resource [mem > 0x00000000-0x7fffffffff] > [ 2.117291] pci_bus 0000:00: root bus resource [bus 00-ff] > [ 2.117392] pci 0000:00:00.0: [168c:0042] type 00 class 0x028000 > [ 2.117853] pci 0000:00:00.0: reg 0x10: [mem 0x94200000-0x943fffff 64bit] > [ 2.123269] input: PC Speaker as /devices/platform/pcspkr/input/input0 > [ 2.123445] pci 0000:00:01.0: [10ec:5287] type 00 class 0xff0000 > [ 2.123701] pci 0000:00:01.0: reg 0x10: [mem 0x94405000-0x94405fff] > [ 2.124627] pci 0000:00:01.0: [Firmware Bug]: reg 0x30: invalid BAR (can't > size) > [ 2.125227] pci 0000:00:01.0: supports D1 D2 > [ 2.125488] pci 0000:00:01.1: [10ec:8168] type 00 class 0x020000 > [ 2.125809] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x30ff] > [ 2.126416] pci 0000:00:01.1: reg 0x18: [mem 0x94404000-0x94404fff 64bit] > [ 2.126728] pci 0000:00:01.1: reg 0x20: [mem 0x94400000-0x94403fff 64bit] > [ 2.127254] pci 0000:00:01.1: supports D1 D2 > [ 2.132739] pcifront pci-0: claiming resource 0000:00:00.0/0 > [ 2.132751] pcifront pci-0: claiming resource 0000:00:01.0/0 > [ 2.132757] pcifront pci-0: claiming resource 0000:00:01.1/0 > [ 2.132762] pcifront pci-0: claiming resource 0000:00:01.1/2 > [ 2.132767] pcifront pci-0: claiming resource 0000:00:01.1/4 > [ 2.171346] intel_rapl: Found RAPL domain package > [ 2.171356] intel_rapl: Found RAPL domain core > [ 2.171362] intel_rapl: Found RAPL domain uncore > [ 2.171368] intel_rapl: Found RAPL domain dram > [ 2.181704] EXT4-fs (xvdb): mounted filesystem with ordered data mode. > Opts: discard > [ 2.223582] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 2.223656] r8169 0000:00:01.1: Xen PCI mapped GSI19 to IRQ22 > [ 2.226954] r8169 0000:00:01.1 eth0: RTL8411 at 0xffffc90000416000, > 54:ab:3a:81:38:24, XID 1c800800 IRQ 23 > [ 2.226966] r8169 0000:00:01.1 eth0: jumbo features [frames: 9200 bytes, > tx checksumming: ko] > [ 2.227285] rtsx_pci 0000:00:01.0: Xen PCI mapped GSI16 to IRQ24 > [ 2.227510] rtsx_pci 0000:00:01.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, > pci->irq = 25 > [ 2.227577] BUG: unable to handle kernel paging request at ffffc90000418010 > [ 2.227584] IP: [<ffffffff813caaee>] iowrite32+0x2e/0x40 > [ 2.227592] PGD 31e45067 PUD 31e44067 PMD 2df20067 PTE 8010000094405075 > [ 2.227598] Oops: 0003 [#1] SMP > [ 2.227602] Modules linked in: rfkill rtsx_pci(+) r8169 mfd_core mii > intel_rapl iosf_mbi x86_pkg_temp_thermal coretemp crct10dif_pclmul > crc32_pclmul crc32c_intel pcspkr xen_pcifront dummy_hcd udc_core xen_blkback > xenfs xen_privcmd u2mfn(O) xen_blkfront > [ 2.227623] CPU: 1 PID: 296 Comm: systemd-udevd Tainted: G O > 4.4.31-11.pvops.qubes.x86_64 #1 > [ 2.227628] task: ffff88002ddf1e00 ti: ffff88002efb4000 task.ti: > ffff88002efb4000 > [ 2.227633] RIP: e030:[<ffffffff813caaee>] [<ffffffff813caaee>] > iowrite32+0x2e/0x40 > [ 2.227640] RSP: e02b:ffff88002efb7a10 EFLAGS: 00010296 > [ 2.227643] RAX: ffffc90000418000 RBX: 0000000000000400 RCX: > 00000000fffffffa > [ 2.227647] RDX: ffff88002efb7a47 RSI: ffffc90000418010 RDI: > 00000000bc320000 > [ 2.227650] RBP: ffff88002efb7a30 R08: 0000000000000000 R09: > ffff88002f028000 > [ 2.227654] R10: 0000000000000000 R11: ffff88002efb79a8 R12: > ffff88002ef6a400 > [ 2.227657] R13: ffff88002efb7a47 R14: ffff88002e556840 R15: > ffff88002ef6a400 > [ 2.227663] FS: 00007f146c4448c0(0000) GS:ffff880031900000(0000) > knlGS:ffff880031900000 > [ 2.227668] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 2.227671] CR2: ffff8000004a2028 CR3: 000000002e0e1000 CR4: > 0000000000042660 > [ 2.227675] Stack: > [ 2.227677] ffffffffa00a9358 ffff88002ef6a400 ffff88002cfa9098 > ffffffff81c16a80 > [ 2.227683] ffff88002efb7a58 ffffffffa00ace7c 0402000000000000 > 00000000fa56cdea > [ 2.227689] ffff88002ef6a400 ffff88002efb7a80 ffffffffa00ad135 > 00000000fa56cdea > [ 2.227695] Call Trace: > [ 2.227701] [<ffffffffa00a9358>] ? rtsx_pci_read_register+0x38/0x80 > [rtsx_pci] > [ 2.227709] [<ffffffffa00ace7c>] rtl8411_init_common_params+0x7c/0xb0 > [rtsx_pci] > [ 2.227716] [<ffffffffa00ad135>] rtl8411b_init_params+0x25/0xc0 [rtsx_pci] > [ 2.227721] [<ffffffffa00ab55d>] rtsx_pci_probe+0x85d/0xa10 [rtsx_pci] > [ 2.227726] [<ffffffff813fb6d5>] local_pci_probe+0x45/0xa0 > [ 2.235001] [<ffffffff813fcadd>] pci_device_probe+0xfd/0x140 > [ 2.235001] [<ffffffff814e6c52>] driver_probe_device+0x222/0x490 > [ 2.235001] [<ffffffff814e6f44>] __driver_attach+0x84/0x90 > [ 2.235001] [<ffffffff814e6ec0>] ? driver_probe_device+0x490/0x490 > [ 2.235001] [<ffffffff814e471c>] bus_for_each_dev+0x6c/0xc0 > [ 2.235001] [<ffffffff814e640e>] driver_attach+0x1e/0x20 > [ 2.235001] [<ffffffff814e5f4b>] bus_add_driver+0x1eb/0x280 > [ 2.235001] [<ffffffffa00b7000>] ? 0xffffffffa00b7000 > [ 2.235001] [<ffffffff814e7810>] driver_register+0x60/0xe0 > [ 2.235001] [<ffffffff813fb01c>] __pci_register_driver+0x4c/0x50 > [ 2.235001] [<ffffffffa00b701e>] rtsx_pci_driver_init+0x1e/0x1000 > [rtsx_pci] > [ 2.235001] [<ffffffff81002123>] do_one_initcall+0xb3/0x200 > [ 2.235001] [<ffffffff81754568>] ? preempt_schedule_common+0x18/0x30 > [ 2.235001] [<ffffffff8175459c>] ? _cond_resched+0x1c/0x30 > [ 2.235001] [<ffffffff811ffb76>] ? kmem_cache_alloc_trace+0x196/0x210 > [ 2.235001] [<ffffffff8119ef90>] ? do_init_module+0x27/0x1cb > [ 2.235001] [<ffffffff8119efc8>] do_init_module+0x5f/0x1cb > [ 2.235001] [<ffffffff8111e78e>] load_module+0x151e/0x1a70 > [ 2.235001] [<ffffffff8111ae20>] ? __symbol_put+0x60/0x60 > [ 2.235001] [<ffffffff81226200>] ? kernel_read+0x50/0x80 > [ 2.235001] [<ffffffff8111ef24>] SYSC_finit_module+0xb4/0xe0 > [ 2.235001] [<ffffffff8111ef6e>] SyS_finit_module+0xe/0x10 > [ 2.235001] [<ffffffff817585ee>] entry_SYSCALL_64_fastpath+0x12/0x71 > [ 2.235001] Code: ff ff 03 00 77 25 48 81 fe 00 00 01 00 76 07 0f b7 d6 89 > f8 ef c3 55 48 89 f7 48 c7 c6 c8 99 a9 81 48 89 e5 e8 54 fe ff ff 5d c3 <89> > 3e c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 48 81 ff > [ 2.235001] RIP [<ffffffff813caaee>] iowrite32+0x2e/0x40 > [ 2.235001] RSP <ffff88002efb7a10> > [ 2.235001] CR2: ffffc90000418010 > [ 2.235001] ---[ end trace cea42d48a25df738 ]--- > [ 2.256393] cfg80211: World regulatory domain updated: > [ 2.256403] cfg80211: DFS Master region: unset > [ 2.256406] cfg80211: (start_freq - end_freq @ bandwidth), > (max_antenna_gain, max_eirp), (dfs_cac_time) > [ 2.256415] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, > 2000 mBm), (N/A) > [ 2.256422] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz > AUTO), (N/A, 2000 mBm), (N/A) > [ 2.256427] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, > 2000 mBm), (N/A) > [ 2.256433] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz > AUTO), (N/A, 2000 mBm), (N/A) > [ 2.256438] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz > AUTO), (N/A, 2000 mBm), (0 s) > [ 2.256443] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, > 2000 mBm), (0 s) > [ 2.256448] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, > 2000 mBm), (N/A) > [ 2.256453] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, > 0 mBm), (N/A) > [ 2.262167] r8169 0000:00:01.1 enp0s1f1: renamed from eth0 > [ 5.101302] Adding 1048572k swap on /dev/xvdc1. Priority:-1 extents:1 > across:1048572k SSFS > [ 5.140106] nf_conntrack version 0.5.0 (6017 buckets, 24068 max) > [ 5.202047] ip6_tables: (C) 2000-2006 Netfilter Core Team > [ 5.486215] IPv6: ADDRCONF(NETDEV_UP): enp0s1f1: link is not ready > [ 5.513347] r8169 0000:00:01.1 enp0s1f1: link down > [ 5.513374] r8169 0000:00:01.1 enp0s1f1: link down > [ 5.516086] IPv6: ADDRCONF(NETDEV_UP): enp0s1f1: link is not ready > [ 6.572989] fuse init (API version 7.23) > [ 8.805626] r8169 0000:00:01.1 enp0s1f1: link up > [ 8.805668] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s1f1: link becomes ready > [ 189.857670] IPv6: ADDRCONF(NETDEV_UP): vif3.0: link is not ready > [ 191.909627] vif vif-3-0 vif3.0: Guest Rx ready > [ 191.909651] IPv6: ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready > > > I will keep trying random things...Fingers Crossed.
what version qubes you running? What kernel? maybe you should try a diff kernel. see if a newer one in testing repo maybe? maybe this iwll help https://ask.fedoraproject.org/en/question/84639/i-need-drivers-for-qualcomm-atheros-device-168c0042-rev-30/ -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/4697c3cc-0f35-47d5-8bd9-ad915cf716c2%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
