On Friday, January 13, 2017 at 7:15:41 AM UTC+4, [email protected] wrote: > On 01/12/2017 07:52 AM, Steve wrote: > > > I need to run Samsung Magician software in Windows to flash the firmware of > > the SSD's I put in the laptop, is there any special way I need to setup the > > Windows VM to give direct access to the firmware > > > You would have to attach to the VM with IOMMU the storage controller > that the drive is connected to, > > Obviously you can't do that if you are also using this controller for > your OS, without some ramdisk magic which is possible with some effort > but if you have the money it would be cheaper to simply buy an > Expresscard controller that supports SATA (fyi SAS almost always > includes SATA) > > In the future don't buy crappy consumer level devices that only provide > a windows flashing utility.
Thank you for the ExpressCard suggestion, that is possible. I also have two internal mSata slots and will check whether they are on a different controller than the main SATA -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/3d8e2a25-4adb-4f13-9684-2e2fc2d0b04d%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
