> If you run lspci in dom0 you will get the list of devices and their bus > numbers. If you look for devices on 0000:03:00 this should give clues about > what is going on.
Thank you. So apparently the 03:00.2 is the Ethernet controller, the 03:00.0 is a PCI express card reader. In any case I went to the sys-netVM under VM settings> devices and made sure to move all three on the selected list (that was an intuition after seeing part of the video in the quebes that spoke about pci). After that it did not give mt that error anymore. We have moved on the the next error :-). I get an Ethernet Network Device not managed. I added a "vpn connection" or at least I opened vpn connection, and added the data of my wifi, security and password. SSID: [ssid name Mode: hotspot Band: Automatic Channel: default Device: LEFT THIS BLANK Wi-fi security: [wrote the password] But apparently that is not enough. Thanks again for any hint -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/f7da22d1-9850-4017-bd14-6c23f897da39%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.