On Thursday, February 2, 2017 at 5:07:08 AM UTC-5, mr....@gmail.com wrote:
> This text was written using Google translate.
> As we know, there are two potentially dangerous technology Hardware Trojan: 
> Intel ME and AMD PSP
> I have not seen AMD, so I decided to make the maximum performance and 
> security system based on intel. First, I began to choose the chipset. After 
> reading about the technology intel amt my choice fell on the p965 and n790i. 
> I needed a chipset meets the following conditions:
> 1). No intel amt.
> 2). maximum capacity
> 3) not less than FSB 1333 for the installation of fast xeon
> 4). DDR3
> 
> The chipsets p965 not natively support 1333 FSB CPUs, but there is a 
> development from the company gigabyte allowing the use of this frequency on 
> these chipsets. This is possible on the board (the last revision ONLY):
> GA-965P-DQ6;
> GA-965P-DS4;
> GA-965P-DS3P;
> GA-965P-DS3;
> GA-965P-S3.
> Unfortunately, these boards do not support DDR3.
> 
> But the chipset nForce 790i decide my problems! 1600 MHz FSB, DDR3 2000 MHz! 
> Ideally! Plus, the Intel Xeon E5472 support.
> It seemed, would have found a solution ... But there is no support EPT, and 
> VT-d, required for qubes rel.4.
> 
> Based on the above, there are two ways:
> 1). Use Qubes Release 4.x, and be subject to the influence of Hardware Trojan 
> Intel (AMD?).
> 2). Use Qubes Release 3.x and be subject to the influence of XSA 148 types of 
> errors.
> 
> Which path to choose?

There are bios hardware flash that will disable/uninstall all but 2 packages of 
Intel ME IIRC removing 5 packages.  This is so far the best I have seen for 
getting as close as we can with limiting what amounts to a intel low level OS 
which tech has the power to circumvent anything we do at the user OS level.  No 
longer does the baremetal term apply as it use to in the past.  The CPU and 
chipset manf as wanting and taking more and more control away from the primary 
OS thus locking us down more and more and increasing their control of the 
entire PC.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/9532583e-c2ee-4703-8212-b1965c687249%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to