HCL report as requested. I noticed the report states no TPM although I could have sworn I saw something about TPM somewhere in system logs or command outputs...
On 27 February 2017 at 23:24, Chris Laprise <[email protected]> wrote: > On 02/27/2017 05:47 PM, [email protected] wrote: > >> Hello, >> >> I successfully installed Qubes R3.2 on a Fujitsu Esprimo Q520 with an SSD >> and tested with 4GB and 16GB of RAM. Following the instructions to enable >> TRIM for the SSD worked. >> >> All hardware was detected: ethernet (intel I217-V) , wifi (intel 2230), >> sound (intel hda), bluetooth (intel - attached via USB) and card reader >> (realtek RTS5129). >> >> There's an (optional) TPM onboard but I've not played with that yet. >> >> The only downside to this particular computer is that although there are >> reported to be four USB controllers only one xhci controllers is driving >> all 6 USB ports so a USB-vm must not be used otherwise you will lose mouse >> and keyboard after the LUKS prompt but prior to the login prompt. >> >> Due to the USB problem (which was entirely self-inflicted) I'm now very >> familiar with the rescue disk functionality! >> >> As I have USB attached bluetooth and card reader and a dive computer >> (serial) cable I'm interested in any undocumented (and likely, not >> recommended) ways of passing these devices straight from dom0 to an appvm. >> >> Dave. >> >> > Hi Dave, > > Can you attach the .yml output from 'qubes-hcl-report'? > > Thanks... > > Chris > -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/CA%2BR_O8bq_AxdSQG91ahf9%3DN2muZL%3DQQKv00L1-66EWRf1bMTdw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
Qubes-HCL-FUJITSU-ESPRIMO_Q520-20170227-232713.yml
Description: application/yaml
