On Wednesday, 12 April 2017 23:30:51 UTC+1, mystre...@gmail.com wrote: > Hello, i hope you can help me. > After I install Qubes to the SSD and reboot, it does not recognize the SSD as > a bootable device. Using the same install procedures on another SSD (SATA), > everything works fine. When using Qubes from the SSD (SATA) to access the M.2 > SSD, the BOOT file is empty, so there are no files to rename as you've > directed in the UEFI troubleshooting. Also, I cannot access the /BOOT/EFI/ > file on my SSD (SATA), it says I don't have the required permissions. > I have also compared the Partitions from my M.2 SSD and the other SSD and > they are the same. > M.2 SSD PARTITIONS: http://imgur.com/a/GPCYh > SSD PARTITIONS: http://imgur.com/a/QIzph
You likely have a marvell based m.2 SSD they have a issue with EFI mode. I add the following to my xen.cfg to get it to show up. pci-phantom=00:00,2 This is a know issue with XEN and marvell m.2 SSDs in EFI mode. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/2e102df8-f008-4e6a-b0b2-a33d62b15bf3%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.