-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Vít Šesták:
> I'll probably have an opportunity to verify some laptop's
> compatibility. My idea is to boot Qubes OS or its installer from USB
> and then to do some checks (most notably VT-d compatibility and USB
> controller topology). It should be something done in reasonable time
> and without installing QubesOS on the machine. How should I do that?
> 
> [...]
> c. Install QubesOS on USB stick (and disable usbvm) and boot it. I
> am not sure if this will work when QubesOS is booted on a different
> hardware than it was installed with. I see some potential
> incompatibilities, e.g., wrong PCI device ids assigned to sys-net or
> too high vCPU count assigned to a VM (target laptop has fewer CPU
> cores) or addresses in fstab/crypttab. While the mentioned issues
> seem to be manageable (remove all PCI devices and fix vCPU count if
> it is too high and check fstab/crypttab), I am not sure if they are
> exhaustive. Maybe this will work well. (After all, I just need dom0
> to boot, not other VMs.)

dom0 should work alright if you switch dracut to no-hostonly mode,
which (mainly) adds all available kernel modules to the initrd:

# echo 'hostonly="no"' >/etc/dracut.conf.d/no-hostonly.conf
# dracut --regenerate-all --force

Rusty
-----BEGIN PGP SIGNATURE-----

iQJ8BAEBCgBmBQJZDRwIXxSAAAAAAC4AKGlzc3Vlci1mcHJAbm90YXRpb25zLm9w
ZW5wZ3AuZmlmdGhob3JzZW1hbi5uZXQ4NEI1OUJDRkM2MkIxMjlGRTFCMDZEMDQ0
NjlENzhGNDdBQUYyQURGAAoJEEadePR6ryrf0XEP/0rhfOaoIkBxtfH33bPan3iR
j7e8THXJZrPR204XwKE6/IWuBEjXEFZ6p5uKO63/cBXCHBiyd+EGnpGBlkOF4S/h
CpHVsDcar37nAVse2219uB49d5fYS9rAaZBANRVep9gaSJk7ku5xE7HtXD/1Zsm0
YxsgSnJixhb0TuLD8o4mMzvKGQ1hm1Uw5d9Z5spkCEkI18Xg87kSDhy1n0PdX9og
56XWB8iZkGnCNtSbrizHnBMEopwmDRwXXkGqs4ga/9tAVDa4SLA4nEoQ8jBbMkmS
VreSzvJGHv+jnrskE/qQwG8+vlXmexpAx+9gLqGKORxfBxdyXq02EOI0lqulT+Gn
+Zc+DN7fSiOa5F5im90ZrYmo0YW40n2FJy6tSJxGGweSJ2ZfqMhuKv+5CfM2Evzb
IKfliH9xmPFGw5l4o7RLbHJNiBD2/ZWrOniRFRRdpl2YXVipmuz/TwLyBD345O+S
tajtccZdoFbZWghllBv3fK+yLNQF00e203U2SYSG5CEPK6E/uxFOAqskd+8Szir5
pqpms0CF67E1BEJLS0AtONWbT0BVC2RBqm/txQ8Izkh9Iilh4O7a9nirb1AOqyKJ
hoeZ/3IzSyTZ/0OymVNjhEExERQNXcCvkMSwQ4VcCcNsAUf9YlgD4EVkugwzAc8w
NPIpWWm9OC0idS1pYyNz
=rkv/
-----END PGP SIGNATURE-----

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/20170506004248.GB1150%40mutt.
For more options, visit https://groups.google.com/d/optout.

Reply via email to