On Sunday, May 7, 2017 at 10:29:34 PM UTC-4, babel wrote:
> On Saturday, May 6, 2017 at 7:38:16 PM UTC+2, menthols wrote:
> > Today installed Qubes 3rd release, but no network connection. Spent hours
> > trying to fix it, but to no avail. Network card is recognized. I have two
> > cables connected, no WiFi. I try to put qubes on Dell poweredge, Intel Xeon
> > e3, 8 GB RAM, Broadcom NetXtreme Gigabit Ethernet PCIe, two 1 TB
> > harddrives. I used option "Test and install" at installation, no error
> > message. I have choosed both harddisks at install, hope there is someway to
> > configure the soft raid. Before tried to install other Linux flavors before
> > (Debian-8 and Fedora-23) and none of them had any trouble connecting to the
> > internet immediately (updates downloaded during install). Maybe need to
> > activate some more PCI devices. What's the best I can do? Wait for the next
> > release? Buy another machine? ;-)
> >
> >
> > Opened netvm terminal and checked the following things:
> >
> > 1. Does 'lspci' list your network adapter?
> > Yes, i've tried both debian-8 and fedora-23 both list the network cards.
> >
> > 2. Do you have interface detected (does 'ifconfig -a' contains en* device)?
> > No, none of them detect the interface using ifconfig.
> >
> > 3. Does kernel messages ('dmesg') contains some errors regarding network
> > device initialization?
> > No, there is no message regarding network at all.
> >
> > 4. Check if linux-firmware package is installed (rpm -q linux-firmware).
> > Yes it is installed.
> >
> >
> > Ethernet controller: Broadcom Corporation NetXtreme BCM5720 Gigabit
> > Ethernet PCIe
>
> Same here on a NUC7i3bn...
> check
> lspci -nnk
> which was shoowing me that the kernel modules for both the ethernet port
> (i219-v intel gigabit ethernet controller) and the 8265 wireless module were
> not loading.
> Sorry to disappoint you, but I still haven't found a solution. If you have
> the same problem and find a solution, please let me know.
are you able to load them manually with modprobe?
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/qubes-users/9bbd641d-80a9-40ca-89cd-d31d51aae39f%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
