Den lördag 17 juni 2017 kl. 12:52:23 UTC+2 skrev [email protected]: > On Saturday, 17 June 2017 18:38:10 UTC+8, Nikolai Stenfors wrote: > > Hello Qubes-users, > > > > I've made a fresh standard installation of Qubes OS on a Lenovo SL510 with > > 220 GB memory. A reclaimed all disk memory during the installation to whipe > > out my previous Debian installation. > > However, whatever I do, for instance open firefox on my personal VM, I get > > the message "Not enough memory to start VM. Close on or more running > > VMs...." > > Your computer doesn't have 220 GB of memory. You have 220 GB of disk space. > Assuming your computer is the Lenovo X220, you probably only have 4 GB of > memory in this machine, as this was the amount the machine was sold with back > when it came out. > > Unfortunately, 4 GB will not get you very far with Qubes. You can do wotk > with 8, but you really need 16. > > > Could somebody give my some step-by-step instructions on how to solve my > > problem? > > I've googled a bit, and it seems as though the X220 supports up to 16 GB, so > the solution for you is to buy a memory upgrade. It should be reasonably > cheap.
OK, my mistake... But "free -ht" gives: mem 1.2G (119M free) swap 9.4G (9,4G free) /N -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/46a419da-1b0f-4361-9124-d8a5e0027aef%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
