On Thursday, July 13, 2017 at 4:14:54 PM UTC-4, Grzesiek Chodzicki wrote: > W dniu czwartek, 13 lipca 2017 20:34:15 UTC+2 użytkownik [email protected] > napisał: > > NUC7i7BNH 32GB RAM 500GB M2 > > > > I was able to load Qubes 3.2 using a efi bootloader. > > > > I am assuming with bleeding edge hardware that issues may pop-up here and > > there. > > > > My current issue is the ethernet driver in sys-net. > > > > lspci drivers are there and firmware version > > 20160609-66.gita4bbc811.fc23.noarch. > > > > "Dom0" dmesg output: > > > > pciback: driver tried to write to read-only configuration space. (bolded, > > not in red) See permissive attributes in sysfs. > > > > At the moment I am not able to use sys-net when I assign a static or dhcp > > IP. > > > > Any help would be much appreciated. > > https://www.qubes-os.org/doc/assigning-devices/ > Go to possible issues and tr both fixes.
I tried both. I am running Qubes OS 3.2 DMA buffer size: qvm-prefs netvm = "netvm does not exist" PCI passthrough issues: systemctl enable qubes-pre-netvm.service = "Failed to execute operation, File exist" Do I need to chmod to match qubes_netvm.service? No luck. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/d017fa3d-9051-4490-9f86-9613608ffdc3%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
