Den mandag den 4. september 2017 kl. 18.55.57 UTC skrev Guerlan: > But it does support UEFI, as I already installed arch linux in uefi mode. So > if it supports, why it won't boot qubes?
Unfortunately knowledge is limited on that, the first I would guess would be wrong secure boot keys, but as you said you have no secure boot on your system. However as memory serves, secure boot isn't always possible to disable or even detect. Perhaps this is the case with your machine? As such, Arch might have a secure key that works with your 2011 UEFI with force enabled secure boot. While Qubes isn't using a key, which will be allowed to be install. As far as I know, secure boot is as old as UEFI, or at least older than 2011. I don't know for sure, but if I had to guess, it's probably that secure boot might be there without realizing it. Even if there are no settings available for it, therefore it won't be obvious if secure boot is running in the background during boot. Basically it comes down to tracking if secure boot is really there (hidden) or not, before you can eliminate it as a source to the problem. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/6292e569-5471-49fd-985c-3ff97e3f72eb%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
