Hello,
I've just installed Qubes OS on my laptop (Dell Precision 5510) and I'm not
able to use my PCI Network card :
lspci (on Dom0) return
03:00.0 Unassigned class [ff00]: Realtek Semiconductor CO., Ltd. RTS525A PCI
Express Card reader (rev01)
I tried to add this device to my sys-net
[user@sys-net ~]$ sudo lspci -v
00:00.0 Network controller: Intel Corporation Wireless 8260 (rev 3a)
Subsystem: Intel Corporation Device 0050
Flags: bus master, fast devsel, latency 0, IRQ 29, NUMA node 0
Memory at ddc00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [40] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number e4-a4-71-ff-ff-13-92-e1
Capabilities: [14c] Latency Tolerance Reporting
Capabilities: [154] L1 PM Substates
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
00:01.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI
Express Card Reader (rev 01)
Subsystem: Dell Device 06e5
Flags: bus master, fast devsel, latency 0, IRQ 27, NUMA node 0
Memory at dd100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [b0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [148] Device Serial Number 00-00-00-01-00-4c-e0-00
Capabilities: [158] Latency Tolerance Reporting
Capabilities: [160] L1 PM Substates
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
[user@sys-net ~]$ ifconfig
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 52 bytes 5084 (4.9 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 52 bytes 5084 (4.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
vif21.0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.137.1.1 netmask 255.255.255.255 broadcast 0.0.0.0
inet6 fe80::fcff:ffff:feff:ffff prefixlen 64 scopeid 0x20<link>
ether fe:ff:ff:ff:ff:ff txqueuelen 32 (Ethernet)
RX packets 1616 bytes 274265 (267.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2378 bytes 1535955 (1.4 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp0s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.13.105 netmask 255.255.255.0 broadcast 192.168.13.255
inet6 fe80::e6a4:71ff:fe13:92e1 prefixlen 64 scopeid 0x20<link>
ether e4:a4:71:13:92:e1 txqueuelen 1000 (Ethernet)
RX packets 2385 bytes 1541585 (1.4 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1668 bytes 348099 (339.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Thanks in advance.
L.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/qubes-users/a37e7523-184f-4d98-ba38-c2523115f4fe%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
