Hello, Thanks. I tried this. Now I am running into problems with the PCI devices I am using. Qubes can't reset those. For some reason they are not exposing the FLR capability. I am trying to find out why because they should according to the datasheet.
Best regards, -----Original Message----- From: awokd [mailto:[email protected]] Sent: Thursday, January 11, 2018 10:50 AM To: Wim Vervoorn <[email protected]> Cc: qubes-users <[email protected]> Subject: Re: [qubes-users] validate IOMMU support On Thu, January 11, 2018 9:43 am, Wim Vervoorn wrote: > Hello, > > > I added IOMMU support to coreboot (DMAR tables with filled DHRD and > RMRR > structures) and want to make sure everything is configured correctly. > > I did check this using the Ubuntu fwts and also checked using > qubues-hcl-report. All of these seem fine and I don't notice any > obvious issues issues in my Qubes 4.0 rc 3 installation. > > There are no warnings regarding this in the dmesg and journalctl. > > > Can I assume everything has been implemented correctly in Qubes or > should I perform additional testing to make sure this is really working? Not sure how "obvious" you mean, but I think if you have tested PCI passthrough to an HVM and it works, you should be good. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/a980234ef1b74ba5b802ff80a9d7321b%40Eltsrv03.Eltan.local. For more options, visit https://groups.google.com/d/optout.
