W dniu sobota, 13 stycznia 2018 20:52:44 UTC+1 użytkownik vel...@tutamail.com napisał: > I am hoping some folks can help me with some basic tests and commands to > verify my Qubes 3.2 is set up correctly: > > I ran a qubes command in Dom0 to verify if VT-d is > working(https://www.qubes-os.org/doc/security-guidelines/): > > qubes-hcl-report AppVM (Name of "AppVM" I was running) > > The results were as follows: > > It listed my computer, BIOS, XEN version, etc... > > It also stated: > HVM: Active > I/O MMU: Active > HAP/SLAT: Yes > TPM: Device present > Remapping: Yes > > Per some googling: "....Alternatively, in dom0 (under Qubes OS or Xen more > generally) you could grep for "virtualisation" or "VT-d". You should either > see "I/O virtualisation enabled" or "I/O virtualisation disabled"...: > > In Dom0 I ran the command: > > grep "VT-d" > grep "virtualisation" > > Nothing really happened after waiting 10 minutes...so I closed the terminal. > > > My concerns are: > I have VT-d and VT-x enabled in my BIOS....am I actually using this feature? > Any other commands or checks I can do to confirm my installation is done > correctly? > > Thanks again and happy new years Qube group...thank you again for all you do! > > V
sudo xl dmesg|grep VT-d -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/5882144a-60c2-41a2-b31c-3f8611e4c9f9%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
