On Wednesday, February 7, 2018 at 3:12:34 AM UTC-5, awokd wrote: > On Wed, February 7, 2018 3:28 am, dbr287 wrote: > > I've installed rc4 on G505S with Coreboot (legacy bios). Installation > > went ok (found iommu and interrupt remapping just fine). > > > > On 1st (gui) boot, I've tried all the combinations selecting 1) create > > ServiceVMs, AppVMs, 2) only ServiceVMs, 3) only configure templates,... > > but none works. It always hangs at Configuring 1st template (usually > > debian-9). > > You probably need to manually add this patch > https://review.coreboot.org/#/c/coreboot/+/22843/ to your coreboot image. > Also, disable XHCI (two options right next to each other in menuconfig.) > > If it continues to hang on sys-net creation, try pulling the wireless card > before installing Qubes. It will still create a sys-net qube containing > the onboard ethernet, but then you can add the wireless card back and > troubleshoot on a full system.
Thanks! This worked fine. Applied 2 patches, and rebuild coreboot, flashed, and re-ran R4.0rc4 install, works like a charm. Thanks again for the prompt response. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/c64bcb95-2c51-4829-aa85-b334ec204887%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
