Aye, there's no onboard graphics, there's compatibility with VGA or some sort
of pass through for boot and BIOS, not sure.
But anyway, tried 3.2 and that worked fine! So at least I can learn a bit about
Qubes before having to re-install for 4 final.
All the best
On Friday, 23 February 2018 02:24:44 UTC, awokd wrote:
> On Thu, February 22, 2018 1:39 pm, CMaurice wrote:
> > So, having exhausted other options as far as I could tell, followed the
> > instructions for installing over VNC, which went ok.
> > Legacy boot elected in BIOS for hd and for USB media at install.
> > But on boot without nomodeset and no i915 entry went quickly to a reboot
> > Log nomodeset.out attached.
> > Booting without nomodeset and with modprobe.blacklist=nouveau in place of
> > the i915 entry failed at '[OK] Started Accounts Service' (logs dmesg.txt,
> > Xorg.9.log attached).
> > I'd be grateful for ideas on how to proceed, even perhaps alternate
> > graphics card suggestions.
> Saw in your other email this is Qubes 4.0rc4. Looks like you've tried all
> the basic steps and then some. Does this laptop have a way to use Intel
> integrated graphics? If so, check
> https://www.qubes-os.org/doc/intel-igfx-troubleshooting/ for the command
> line option to enable that driver.
> Nvidia and Linux generally don't work well together, and I don't have any
> of their hardware so don't have much insight there. AMD RX580s and earlier
> (maybe newer too but not a lot of data) work pretty well with Qubes, as
> does Intel video (usually).
You received this message because you are subscribed to the Google Groups
To unsubscribe from this group and stop receiving emails from it, send an email
To post to this group, send email to firstname.lastname@example.org.
To view this discussion on the web visit
For more options, visit https://groups.google.com/d/optout.