On 03/23/2018 07:08 PM, [email protected] wrote: > FYI, for anyone who runs across this issue with getting a PCI graphics > card to work with a SeaBIOS payload, try disabling the onboard video > via the VGA jumper on the motherboard. > > By physically disabling the onboard VGA via the jumper setting, I was > able to get Qubes 4 to boot with the PCI card via Coreboot/SeaBIOS. You can also change this behavior in coreboot menuconfig to have the PCI-e video card set as the primary video adapter.
Using fancontrol/pwmconfig OR the installation of the OpenBMC port on an ASMB4 or ASMB5 module is required for fan control. The KGPE-D16 is very similar so I suggest anyone who has a D8 to read the D16 wiki page. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/5dd2bd32-c695-6d78-caed-c09a286aa90e%40gmx.com. For more options, visit https://groups.google.com/d/optout.
