I'm absolutley new to linux, thus i had many difficulties and will stay
for first to a simpler os like ubuntu.
Card ready is working. I hve not been able to get the network devices
working.
The installation works well but i had to use this (also in txt):
--------------------
Boot device not recognized after installing
Some firmware will not recognize the default Qubes EFI configuration. As
such, it will have to be manually edited to be bootable (this will need
to be done after every kernel and Xen update.)
1. Copy /boot/efi/EFI/qubes/ to /boot/efi/EFI/BOOT/.
2. Rename /boot/efi/EFI/BOOT/xen.efi to /boot/efi/EFI/BOOT/BOOTX64.efi.
3. Rename /boot/efi/EFI/BOOT/xen.cfg to /boot/efi/EFI/BOOT/BOOTX64.cfg.
https://www.qubes-os.org/doc/uefi-troubleshooting/#boot-device-not-recognized-after-installing
--------------------------------
Another Problem was, that the integrated keyboard was not recognized for
unloking the encrpted drive, there i had to use an external usb
keyboard. later the notebooks integrated keyboard works fine.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/qubes-users/7b793feb-49b1-a809-4afc-5daa5e58ddbd%40gmx.de.
For more options, visit https://groups.google.com/d/optout.
---
layout:
'hcl'
type:
'convertible'
hvm:
'yes'
iommu:
'no'
slat:
'yes'
tpm:
'unknown'
brand: |
FUJITSU
model: |
LIFEBOOK T937
bios: |
Version 1.12
cpu: |
Intel(R) Core(TM) i5-7300U CPU @ 2.60GHz
cpu-short: |
FIXME
chipset: |
Intel Corporation Device [8086:5904] (rev 02)
chipset-short: |
FIXME
gpu: |
Intel Corporation Device [8086:5916] (rev 02) (prog-if 00 [VGA controller])
Intel Corporation Device [8086:9d35] (rev 21)
gpu-short: |
FIXME
network: |
Intel Corporation Ethernet Connection (4) I219-LM (rev 21)
Intel Corporation Device 24fd (rev 78)
memory: |
8056
scsi: |
versions:
- works:
'FIXME:yes|no|partial'
qubes: |
R3.2
xen: |
4.6.1
kernel: |
4.4.14-11
remark: |
FIXME
credit: |
FIXAUTHOR
link: |
FIXLINK
---
Boot device not recognized after installing
Some firmware will not recognize the default Qubes EFI configuration. As such,
it will have to be manually edited to be bootable (this will need to be done
after every kernel and Xen update.)
1. Copy /boot/efi/EFI/qubes/ to /boot/efi/EFI/BOOT/.
2. Rename /boot/efi/EFI/BOOT/xen.efi to /boot/efi/EFI/BOOT/BOOTX64.efi.
3. Rename /boot/efi/EFI/BOOT/xen.cfg to /boot/efi/EFI/BOOT/BOOTX64.cfg.
https://www.qubes-os.org/doc/uefi-troubleshooting/#boot-device-not-recognized-after-installing
