On 05/11/18 07:30, Mindus Amitiel Debsin wrote:
I was reading through this thread:
https://groups.google.com/d/msg/qubes-users/nphUyv7Msow/Vs2TX8tjAwAJ
and I noticed some similarities, but also some differences between our two
situations.
My system:
Asus Sabertooth x79 with Intel i7 3930k
32GB of quad-channel DDR3 RAM
I have tried two different installation methods:
by DVD: Loads fine and then gets to this point:
See two attached jpgs, IMG_0882b1000.jpg and IMG_0883b1000.jpg
by USB-boot (non-UEFI): Loads to the Q screen with a white progress-bar on the
bottom and then freezes forever. This is before any installation or options or
disk-choosing.
by USB-boot (UEFI): Just crashes and restarts as soon as it starts loading off
of the USB-drive.
I have tried every major fix in the BIOS and still the problems persist.
My settings:
Intel VT-X: enabled
Intel VT-D: enabled
Sata config: Raid mode
Compatibility Support Module: enabled
Boot Device Control: UEFI and Legacy
Secure Boot: disabled, "Other OS", Platform Key State: Unloaded
Boot order: every combination.
I'm so frustrated with this. Have been trying to get it installed for a few
weeks now, on and off. But I imagine that this community knows everything about
the installation process, so I hope you can help me. If there's something that
I missed, or any other information you'd like, please ask away!
I think that privacy and security are really important and I'd like very much
to use Qubes, but I simply cannot find a way to get it installed.
Thanks for reading,
~Debsin
So, if it were me, I would go back and make sure I created a USB
installation media correctly, like maybe if of method ......
stick with legacy mode, enable any VT that you have ; secure boot
off ; compatibility enabled , Sata I have no idea, if you have
any onboard graphics choice, make sure discrete graphics is off ....
I did see one of your type on the HCL for version 3.1, maybe you'd be
happy with 3.2 or you don't say what version your installing ...
sadly your attachments probably may get ignored, I for one, can't get
them to open in Thunderbirds 'open in DVM' and I don't really want to
download them myself
I think your system is too old for UEFI install, though there is the
EFI troubleshooting guide, which part of the qubes docs have you
read or following ?
IF you must have qubes now, try 3.2 its supported for another 9
months, and then you'll have the qubes way more fluent I suppose
.... depending on your threat profile or whatever .....
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/qubes-users/b3bc1e63-0e62-c405-2a51-8a63c9d70860%40riseup.net.
For more options, visit https://groups.google.com/d/optout.
