On Monday, April 16, 2018 at 3:14:43 PM UTC-7, fiasc...@gmail.com wrote: > Summary: Install worked reasonably well and it boots with EFI into the > installed Qubes 4.0 nicely. There are a few issues to resolve. > > 1. I have the model with a touch screen and I haven't debugged how to make it > work yet (I'll get to that and post back what worked). > > 2. Suspend/resume doesn't work and I have to do a hard reset. A few times > (not all) I had to hard reset twice to get it to reboot properly. > > 3. HCL reports no TPM, but I have a dTPM 2.0. > > It's booting with UEFI smoothly. I haven't tested the mic, camera, or ports > except USB for storage yet. I'll update once I find fixes for the above. If > anyone could point me in the right direction for the suspend freezing issue, > let me know. I tried shutting down all VMs, including service VMs after > reading this, > https://groups.google.com/d/msg/qubes-users/81t26xq4MEI/HrfDEcjeAgAJ but the > problem persisted didn't change anything.
Confirming that DJB's notes in that thread worked for me. Currently running 4.14.67 with patches. Also want to note that the latest 1.30 (I'm about to install it) bios supports a toggle for Linux vs Windows sleep states. It was released around 9/8/2018. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/fa2e89f9-c72a-4e28-9d3f-789efd791939%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
