On Monday, November 19, 2018 at 1:09:33 AM UTC-5, Chris Laprise wrote: > The Qubes VPN doc has two methods for correct openvpn configuration: > > https://www.qubes-os.org/doc/vpn/ > > A better method is located here: > > https://github.com/tasket/Qubes-vpn-support/ > > The difference is more failsafe checks and much smoother setup & operation.
Thanks for your reply. I'm entirely willing to consider using these better, more secure and effective methods in the long run. My first objective however is to determine why the simple method I used in Qubes 3.2 (running Openvpn from AppVM) does not successfully work the same way in Qubes 4.0. > I would also try pinging known IP addresses (after connecting) to see if > you can get a response. If you can, then the problem is likely with the > DNS routing and dnat in the firewall. I've just tested this. After connecting to the VPN from within the AppVM, I can successfully ping known IP addresses from the terminal. However attempts to connect to websites in the browser fail and time out. What is my next step? How do I check or fix DNS routing and dnat in the firewall? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/c80be580-203d-4228-b18b-9a980113d8ec%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
