On Saturday, November 24, 2018 at 4:54:13 PM UTC-5, [email protected] wrote: > Thanks do you have a Link to the merged PR..
Sorry for the delay. All work was here: https://github.com/QubesOS/qubes-installer-qubes-os/pull/20 > then you mean mounting the installer usb in macOS > cd to /Volumes and then cd into stick? Or mount macOS EFI and cd into the EFI > ? If you have a dual-boot setup, or installed Qubes to a USB stick, when you boot macOS normally you'll see a new mount for HFS+ on your desktop (or after you plug in the USB stick). You'll see the 00-README.txt in the root of that EFI partition when you open it. If you don't have a dual-boot, you'll need to boot off of some other Live USB boot disk. I personally prefer Arch Linux as I am used to its utility stack. But you could also easily boot a Ubuntu Desktop Live USB (normal USB install, just asks as an option on grub when booting). Once you boot that Live USB and at the desktop, you can then drop to a terminal and run "lsblk" to see what disks and partitions you have. You should be able to easily identify the /dev/sdXy disk and partition that has the 200 MB EFI HFS+ format. Mount it as rw and then you can read the readme, and make changes to the Xen.cfg file. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/e49cb710-e15e-4003-aa28-aaea2dbdf94f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
