On 12/4/18 5:16 PM, dimi wrote:
Have been reading up on jack audio control kit and decided to try out to get sound from my surfing AppVM over to a rpi3 which is connected to my PA. I'd prefer not to lay 25m Audio cables which is bad for sound quality and it also would free up my Desk from this little ugly Boxessess. Does anyone have any experience and success storys or can point me to a painless solution?
IMHO your best bet would be to use pulseaudio over the network. I used that setup years ago but lost my notes so can't help with specifics, but searching "pulseaudio over network" on the web give plenty of useful info. It boils down to setting up pulseaudio on the rpi3 with the module-native-protocol-tcp module and configuring your AppVM to use a sink that sends audio to the network server instead of dom0.
By the way, do you have any specific requirement for using JACK ? It's mostly used for low-latency/low-jitter audio stuff - which is orthogonal with tcp/udp.
-- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/46920fca-01b8-de3c-1c02-4ff61c2ea02c%40maa.bz. For more options, visit https://groups.google.com/d/optout.
