On Wednesday, January 16, 2019 at 7:55:10 AM UTC-8, Eric Duncan wrote: > Difficult to setup due to the "I219-LM" Network controller needing > permissive=true and no-strict-reset=true and unable to install latest nvidia > cuda drivers. Kernel-latest and/or Xen 4.8 does not support the Intel UHD GPU > even when disabling nouveau - must use Nvidia only for now. > > Sleep not working with BIOS 1.17 (known issue of all the latest Lenovo > Thinkpad models since they removed S1 and S3 from BIOS). Log a support ticket > with Lenovo. > > Tested with 4.0.1 RTM and kernel-latest (4.19). > > See this post for more debugging information: > https://groups.google.com/d/msg/qubes-users/z51dkaEOiqc/wNhQ_86NGQAJ > > Tip: don't set nomodeset for the Hybrid graphics with blacklisting nouveau - > won't work completely. And setting nouveau.modeset=0 nouveau.blacklist=yes or > modprobe.blacklist=nouveau will only get you 0.33 Frames Per Second refresh > pain which makes the system unusable. Force it to discrete graphics (nvidia) > and leave the nouveau for now. > > Lots of screen flickering with nouveau, and lots of battery drain. > > This model has 32 GB of ECC ram with the Xeon and p2000, used by the 4K > screen. > > ---- > > VM sys-usb exists > Qubes release 4.0 (R4.0) > > Brand: LENOVO > Model: 20MDCTO1WW > BIOS: N2EET35W (1.17 ) > > Xen: 4.8.4 > Kernel: 4.19.12-3 > > RAM: 32385 Mb > > CPU: > Intel(R) Xeon(R) E-2176M CPU @ 2.70GHz > Chipset: > Intel Corporation Device [8086:3ec4] (rev 07) > VGA: > NVIDIA Corporation Device [10de:1cba] (rev a1) (prog-if 00 [VGA controller]) > > Net: > Intel Corporation Device a370 (rev 10) > Intel Corporation Ethernet Connection (7) I219-LM (rev 10) > > SCSI: > > HVM: Active > I/O MMU: Active > HAP/SLAT: Yes > TPM: Device not found > Remapping: yes
Eric, any chance you could try updating the Bios to the recently released version 1.18 which I think should fix the graphics issues allow you to use the intel chip and try again with the latest version of Qubes 4.1 and report back? I literally have a Thinkpad P1 XEON w/32GB ECC and 2x2TB and the upgraded UHD display config that is pending for shipment and if the problems have not been resolved I would really like to know now like you I got this just for Qubes and if I cancel now can avoid $650 in restocking fees. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/316c04c5-22ef-43c7-b26a-027fc730aaf8%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
