> On Friday, March 22, 2019 at 11:42:56 AM UTC-5, wzrd73 wrote: > > > Hallo, > > is there a way to use an additional screen via dp alt mode (usb-c) in Qubes > > 4? > > I'd like to attach an Asus Zen Screen to my laptop. The screen only has a > > usb-c port. My laptop has usb-a und usb-c and hdmi ports. > > There are usb-c to hdmi adapters, but as far as I know they don't work in > > the other direction. > > I'm driving a monitor from my usb-c port (although the cable converts it to > HDMI). I would start with looking at the output of xrandr. On my computer, I > see a listing for DP1. > > If you install arandr in dom0 you'll get an easier to use interface. > > Jon > > My output of xrandr: [User@dom0 ~]$ xrandr Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767 eDP1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 340mm x 190mm 1920x1080 60.00*+ 40.00 1400x1050 59.98 1600x900 60.00 1280x1024 60.02 1280x960 60.00 1368x768 60.00 1280x720 60.00 1024x768 60.00 1024x576 60.00 960x540 60.00 800x600 60.32 56.25 864x486 60.00 640x480 59.94 720x405 60.00 640x360 60.00 HDMI1 disconnected (normal left inverted right x axis y axis) VIRTUAL1 disconnected (normal left inverted right x axis y axis)
Message on the screen, when I connect it: "Your device does not support DP Alt mode, please install the latest driver and try again." The device shows up as: sys-usb:2-4.1 - Realtek_BillBoard_Device_123......FGH sys-usb:3-3.2 - DisplayLink_MB16AC_821.....M0419 -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/jox1f6EfEPnV6fSwpi5cHqACNkfG3aZ0nFG3GZ7nCG7aBv6gz7AD6tev3r2ChcemSz6foQfWxSiEOrrsytQZJh_Pb1vamVksF0Y6d0VIJ-Y%3D%40protonmail.com. For more options, visit https://groups.google.com/d/optout.
