Il giorno giovedì 23 maggio 2019 21:20:44 UTC+2, awokd ha scritto: > This should work. Make sure the USB controller you want to pass through > is deselected from sys-net in its Qube Settings/Devices (on the left > side instead of right).
Thanks for the reply. In fact I tried again with the strict-reset button and the vm at least starts the bootloader. But then again error. All tests all errors 2019-05-17 14: 29: 52.517 + 0000: libxl: libxl_pci.c: 1176: libxl__device_pci_reset: The kernel doesn't support reset from sysfs for PCI device 0000: 00: 14.0 sudo lspci -nnk -s 00: 14.0 00: 14.0 USB controller [0c03]: Intel Corporation 7 Series / C210 Series Family USB Chipset xHCI Host Controller [8086: 1e31] (rev 04) Subsystem: Dell Device [1028: 057e] Kernel driver in use: pciback Kernel modules: xhci_pci qvm-pci attach --persistent --option permissive = true --option no-strict-reset = true khal-2 dom0: 00: 14.0 qvm-pci: error: backend vm 'dom0' doesn't expose device '00: 14.0 ' (also tested with 0000: 00: 14.0) If I try to connect the PCI bridge (root port) the error is: Domain has failed to start: internal error: No endpoints PCI devices cannot be assigned to guest (XEN) [VT-D] It's risky to assign 0000: 00: 14.0 with shared RMRR at c8a0a000 for Dom11. (XEN) MMIO emulation failed: d11v1 64bit @ 0010: ffffffff88c33784 -> 48 0f ae 27 31 c0 0f 1f 00 85 c0 0f 85 9d 00 00 Yet I remember that in the past I worked with a template that wasn't stand alone with interconnected devices. Maybe it was R2, I don't remember. So qrexec doesn't connect, passthrough doesn't work, I don't understand if it's my laptop or something else .... -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/5c53eec6-c1d5-4752-a251-56e3770e0b85%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
