On Tue, Jun 11, 2019 at 10:26:59PM +0000, Jon deps wrote: > Hello, > > for my Foo1 appVM in the Qube Manager I see default disp_vm as printqube > (another AppVM) > > but in the Qubes Settings (accessed via the QM) for that Foo1 AppVM on the > Advanced Tab it shows Default DispVM as default(none) and in the pull > down menu there is no option for printqube as the dispvm > > > I had it working using a Fedora Template with printer drivers installed, > then using a that same printer-template based appvm as the default dispvm > so I could use DispVMs to print > > but somehow I've broken the setup and dispVMs will only open if I use the > fedora-28-dvm or whonix-ws-dvm-14 > > > any suggestions please ?
I cant account for the Qube Manager entry, but the most obvious explanation is that you have somehow removed the "template for dispvms" setting from printqube. Either set that again (using qvm-prefs) or create another qube, set the "template_for_dispvms", and then use that for Foo1. unman -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/20190612002414.xwfffarj6vvm3c3x%40thirdeyesecurity.org. For more options, visit https://groups.google.com/d/optout.