On Wed, Aug 21, 2019 at 02:03:33AM -0700, Bush Al wrote: > Hi all, I am new to Qubes, and trying to install it on a new Intel 9600K > with intel 219-V ethernet. Just after install i got the sys-firewall > message above which seems weird as there should be no pci device in > sys-firewall. > > The boot.log says failed to start sys-net, sys_firewall and sys_whonix > unable to reset pci device 0000:00;1f.6 which is my ethernet card > > systemctl status [email protected] shows the unable to reset message > and so does sys_firewall. > the libvirt/libxl/libxl-driver.log has messages about unable to read > console tty which doesnt seem related and > > libxl: libxl_pci.c:1176:libxl__device_pci_reset: The kernal doesn't support > reset from sysfs for PCI device 0000:00:14.0 > libxl: libxl_pci.c:1176:libxl_linux.c:155:libxl_loopdev_cleanup unable to > release device /dev/loop0: No such device or address > > I have no idea where to go from here, though its obviously an issue with > the network. > > Any ideas gratefully received. > > Thanks > Al >
Hi Al Welcome to Qubes. The problem is that your sys-net is unable to start because of the ethernet card. (You see two messages because when sys-firewall tries to start it tries to start its netvm , and reports *that* failure too.) It should be quite easy to fix. Open Qube Manager (under Menu -System Tools), Right-click on sys-net, and open Qube Settings. Click Devices Tab, and hit the "Configure strict reset" button at the bottom of the pane. Select the NIC in the window that opens, click OK. Click OK. Try to start sys-net. unman -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/20190821110556.GA13237%40thirdeyesecurity.org.
