On Wednesday, September 4, 2019 at 8:12:41 PM UTC-4, Stumpy wrote: > > I have a hard drive that i cant seem to connect to any of the appvms yet > I can see and access it via dom0 (not good i know). > I can attach a usb flash drive to my appvms but not the hard drive? > > This is on my laptop and i do not have a sys-usb (didnt give me the > option when installing qubes (v4.0.2) but if i can connect a flash then > i cant figure why i cant connect the external hard drive to appvms, esp > if i can use/see the drive via dom0? >
That's odd. Is this a SATA or USB hard drive? SATA: On my primary thinkpad, running qubes R4 current-testing (essentially at least v4.0.2), while *sda* is not available for attachment to devices (as that is the boot disk) all the other SATA devices are available for attaching: sdb, sdc (and, when the eSATAp and/or dock is attached, sdd and sde) to VMs. Any valid partitions as well. USB: I generally have not attached USB drives (utilizing the USB IP support via `qvm-usb` aka `qvm-device usb`) to VMs as I find it slow and sometimes buggy. Instead I attach the PCI device encompassing the USB controller utilizing `qvm-device pci` with an HVM, which may be a luxury that other users don't always have (this laptop has three USB PCI devices, one of which is via expresscard). Brendan -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/c7b7be8f-3e99-4602-8f9b-8d0bacfeed39%40googlegroups.com.