'awokd' via qubes-users: > duc...@disroot.org: >> This is an issue that's been reported before, and some solutions appear >> to be out there, including re-installing with Legacy boot. However, they >> all seem to involve modifying the installer prior to installation or >> making changes via a GRUB menu. I'm never presented with a GRUB menu >> with either (I suspect that's a UEFI issue), so I'm not quite sure how >> to proceed with troubleshooting. I want to stick with UEFI-only boot as >> far as possible. >> >> The last messages echoed before the black screen are: >> >>> [VT-D]Passed iommu=no-igfx option. Disabling IGD VT-d engine. >>> Scrubbing Free RAM on 1 nodes using 2 CPUs >>> .................done. >>> Initial low memory virq threshold set at 0x4000 pages. >>> Std. Loglevel: All >>> Guest Loglevel: Nothing (Rate-limited: Errors and warnings) >>> Xen is relinquishing VGA console. >> >> The screen goes black indefinitely at this point. >> >> This is a device with only integrated GPU so I suspected this might be a >> problem. >> >> How should I proceed? >> > Intel integrated GPU usually works well as is. Are you getting the black > screen when you boot the installer, or after it completes and reboots? > The installer boots just fine, no issues at all. It's only after it completes and I try to boot Qubes OS proper that I've just installed that I get this problem.
-- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/999a21f7-3cbb-1db8-d6fb-65ee50a55ff4%40disroot.org.
