On Mon, Jan 27, 2020 at 03:48:39AM -0800, M wrote: > Thanks a lot. > > Can you tell me how to add new storage to the storage poll ? - as I guess I > have to do more than just connecting the drive...
It's standard linux storage, so you can use any tutorial for this. > > And also answer my other question: > > 2) Shall the internal drives which is going to be used together with the > Qubes installation be chosen in the installer, or shall I in the installer > only choose the internal drive which Qubes OS is going to be installed on ? > If the first is correct please explain where in the installer the drives > shall be chosen. > If the last is correct: Then do I have to do anything else to use the > other internal drives together with the Qubes OS installed on the pc ? > I would do the latter and then add the storage in to your Qubes install. This is standard linux fare, and there are many tutorials available on using lvm. It may be easier to create a new storage pool on the new disk (encrypted if you choose). You use the qvm-pool command to add to Qubes, and you can create new qubes there as you wish. qvm-pool is reasonably well documented - the docs on storage-pools are out of date. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/20200127120346.GG839%40thirdeyesecurity.org.
